- 论坛徽章:
- 0
|
ftp3# dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <RCC RCCNILE >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (803.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536805376 (511 MB)
avail memory = 515932160 (492 MB)
ACPI-0698: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [G317] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [KBC_] had invalid type (Integer) for Scope operator, changed to (Scope)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
kbd1 at kbdmux0
acpi0: <RCC RCCNILE> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem 0xfeafc000-0xfeafcfff,0xfe700000-0xfe7fffff irq 29 at device 7.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:20:ed:01:23:68
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xfeafd000-0xfeafdfff,0xfe900000-0xfe9fffff irq 30 at device 8.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:20:ed:01:23:69
pci0: <display, VGA> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
sym0: <1010-66> port 0xc000-0xc0ff mem 0xfebff400-0xfebff7ff,0xfebf8000-0xfebf9fff irq 26 at device 4.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: [GIANT-LOCKED]
sym1: <1010-66> port 0xd000-0xd0ff mem 0xfebff800-0xfebffbff,0xfebfa000-0xfebfbfff irq 27 at device 4.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xcd800-0xcefff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 803413320 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
da0 at sym0 bus 0 target 1 lun 0
da0: <SEAGATE ST336706LW 010A> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
Trying to mount root from ufs:/dev/da0s1a |
|
免费注册
楼主: 52BSD
发表于 2006-12-23 17:06
发表于 2006-12-23 17:07
