- 论坛徽章:
- 0
|
Sun E450 开机后显示器没有显示，拿串口线连上去后，看到如下信息：
Offline: CPU0 (MD'ed)
Offline: CPU1 (MD'ed)
Offline: CPU2 (MD'ed)
Online: CPU3 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Probing keyboard for L1/L1-D...Done
Executing Power On SelfTest w/%o0 = 0000.0000.0010.1002
3>
3>@(#) Sun UltraSPARC-II 4-way UPA/PCI POST 6.1.0 12/20/00: 16:32
3>INFO: Processor 3 is master CPU.
3>INFO: Motherboard rev FCS
3>
3> <00> Init System BSS
3> <00> NVRAM Battery Detect Test
3> <00> NVRAM Scratch Addr Test
3> <00> DMMU TLB Tag Access Test
3> <00> DMMU TLB RAM Access Test
3> <00> Probe Ecache
3>INFO: 4096KB Ecache
3> <00> Ecache RAM Addr Test
3> <00> Ecache Tag Addr Test
3> <00> Invalidate Ecache Tags
3> <00> SC Dtag Probe
3>INFO: Dtag supports up to 8MB Ecache
3>INFO: Processor 0 is missing or disabled.
3>INFO: Processor 1 is missing or disabled.
3>INFO: Processor 2 is missing or disabled.
3> <00> Init SC Regs
3> <00> SC Address Reg Test
3> <00> SC Reg Index Test
3> <00> SC Regs Test
3> <00> SC Dtag RAM Addr Test
3> <00> SC Dtag Init
3> <00> Init SC Regs
3> <00> SC Cache Size Init
3> <00> Synch up Processor Ecache Sizes
3> <00> Probe Memory
3>INFO: No memory detected in Bank 0
3>INFO: No memory detected in Bank 1
3>INFO: 256MB Bank 2
3>INFO: No memory detected in Bank 3
3> <00> Test Memory Data Lines
3> <00> Test Memory Address Lines
3> <00> Malloc Post Memory
3> <00> Init Post Memory
3> <00> Map PROM/STACK/NVRAM in DMMU
3> <00> Memory Stack Test
3> <00> Init Memory
3> <00> ECC Memory Addr Test
3> <00> V9 Instruction Test
3> <00> Memory Addr w/ Ecache Test
3> <00> Block Memory Addr Test
3> <00> Copy Post to Memory
3> <00> Map/Exec POST from Memory
3> <00> Map alternate CPUs
3> <00> Init Memory
3>INFO: No memory in Bank 0
3>INFO: No memory in Bank 1
3>INFO: 256MB Bank 2
3>INFO: No memory in Bank 3
3> <00> OBP Memory Test
3> <1f> Init Psycho
3> <1f> Psycho Cntl and UPA Reg Test
3> <1f> Psycho DMA Scoreboard Reg Test
3> <1f> Psycho Perf Cntl Reg Test
3> <1f> PIO Decoder and BCT Test
3> <1f> PCI Byte Enable Test
3> <1f> Counter/Timer Limit Regs Test
3> <1f> Timer Increment Test
3> <1f> Timer Reload Test
3> <1f> Timer Periodic Test
3> <1f> Mondo Int Map (short) R
3> <1f> Mondo Int Set/Clr Reg Test
3> <1f> Psycho IOMMU Regs Test
3> <1f> Psycho IOMMU RAM NTA Test
3> <1f> Psycho IOMMU CAM NTA Test
3> <1f> Psycho IOMMU RAM Address Test
3> <1f> Psycho IOMMU CAM Address Test
3> <1f> IOMMU TLB Compare Test
3> <1f> IOMMU TLB Flush Test
3> <1f> Stream Buff A Control Reg Test
3> <1f> Psycho ScacheA Page Tag Addr Test
3> <1f> Psycho ScacheA Line Tag Addr Test
3> <1f> Psycho ScacheA RAM Addr Test
3> <1f> Psycho ScacheA Page Tag NTA Test
3> <1f> Psycho ScacheA Line Tag NTA Test
3> <1f> Psycho ScacheA Err Status NTA Test
3> <1f> Psycho ScacheA RAM NTA Test
3> <1f> Stream Buff B Control Reg Test
3> <1f> Psycho ScacheB Page Tag Addr Test
3> <1f> Psycho ScacheB Line Tag Addr Test
3> <1f> Psycho ScacheB RAM Addr Test
3> <1f> Psycho ScacheB Page Tag NTA Test
3> <1f> Psycho ScacheB Line Tag NTA Test
3> <1f> Psycho ScacheB Err Status NTA Test
3> <1f> Psycho ScacheB RAM NTA Test
3> <1f> PBMA PCI Config Space Regs Test
3> <1f> PBMA Control/Status Reg Test
3> <1f> PBMA Diag Reg Test
3> <1f> PBMB PCI Config Space Regs Test
3> <1f> PBMB Control/Status Reg Test
3> <1f> PBMB Diag Reg Test
3> <1f> Consist DMA Rd, IOMMU miss Lpbk Test
3>STATUS=FAILED
3>TEST =Consist DMA Rd, IOMMU miss Lpbk
SUSPECT =Psycho (Functional) U2001
3>MSG =CPU AFSR
exp 00000000.0000ffff
obs 00000001.0080ffff
xor 00000001.00800000
3> <04> Init Psycho
3> <04> Psycho Cntl and UPA Reg Test
3> <04> Psycho DMA Scoreboard Reg Test
3> <04> Psycho Perf Cntl Reg Test
3> <04> PIO Decoder and BCT Test
3> <04> PCI Byte Enable Test
3> <04> PBMA PCI Config Space Regs Test
3> <04> PBMA Control/Status Reg Test
3> <04> PBMA Diag Reg Test
3> <04> PBMB PCI Config Space Regs Test
3> <04> PBMB Diag Reg Test
3> <04> Consist DMA Rd, IOMMU miss Lpbk, PCI B Bus Test
3> <04> Consist DMA Rd, IOMMU miss Lpbk Test
3> <06> Init Psycho
3> <06> Psycho Cntl and UPA Reg Test
3> <06> Psycho DMA Scoreboard Reg Test
3> <06> Psycho Perf Cntl Reg Test
3> <06> PIO Decoder and BCT Test
3> <06> PCI Byte Enable Test
3> <06> PBMA PCI Config Sp
3> <06> PBMA Control/Status Reg Test
3> <06> PBMA Diag Reg Test
3> <06> PBMB PCI Config Space Regs Test
3> <06> PBMB Diag Reg Test
3> <06> Consist DMA Rd, IOMMU miss Lpbk, PCI B Bus Test
3> <06> Consist DMA Rd, IOMMU miss Lpbk Test
3>STATUS =FAILED : First failing device is Psycho (Functional) U2001.
Power On Selftest Completed
Status = 0000.0000.0000.0001 ffff.ffff.f
POST Reset
CPU3 has assumed the role of Boot CPU
@(#) Sun Ultra 450 3.22 Version 0 created 2000/12/20 16:31
Offline: CPU0 (MD'ed)
Offline: CPU1 (MD'ed)
Offline: CPU2 (MD'ed)
Online: CPU3 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Motherboard DTAG SRAMs support up to 8192KB of ECache per CPU Module
Setting system ECache size to 4096KB
Clearing DTAGS...Done
Auxio Level = 0000.0000.0000.0005
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.8000.0000 size = 0000.0000.1000.0000
Clearing Memory...including Unix Retained Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.adff.802f; ROM CRC = 0000.0000.adff.802f
Decompressing into Memory...0000.0000.0004.4c04 (276KB)...Done
Size = 0000.0000.0008.49e0 (531KB)
Starting Forth kernel at 0000.0000.f005.9d3c
ttya initialized
Memory in 1 - way interleave configuration
...Bank #0 0 + 0 + 0 + 0 : 0 MB
...Bank #1 0 + 0 + 0 + 0 : 0 MB
...Bank #2 64 + 64 + 64 + 64 : 256 MB [Available 256MB @ 80000000 ]
...Bank #3 0 + 0 + 0 + 0 : 0 MB
Programming memory controller for 10ns/100MHz
Environmental monitor: disabled
Probing Floppy: drive detected on ID0
Probing Audio: audio codec not present
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 3 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 4 Created Node(s)...pci pci
At UPA Slot 6 Created Node(s)...pci pci
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape
Probing /pci@1f,4000 at Device 2 scsi disk
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Probing /pci@6,4000 at Device 0 This slot excluded from probing...
Probing /pci@6,4000 at Device 1 Nothing there
Probing /pci@6,4000 at Device 2 Nothing there
Probing /pci@6,4000 at Device 3 Nothing there
Probing /pci@6,4000 at Device 4 TSI,gfxp
Probing /pci@6,4000 at Device 5 Nothing there
Probing /pci@6,2000 at Device 0 This slot excluded from probing...
Probing /pci@6,2000 at Device 1 Nothing there
Probing /pci@6,2000 at Device 2 Nothing there
Probing /pci@6,2000 at Device 3 Nothing there
Probing /pci@6,2000 at Device 4 Nothing there
Probing /pci@6,2000 at Device 5 Nothing there
Probing /pci@4,4000 at Device 0 This slot excluded from probing...
Probing /pci@4,4000 at Device 1 Nothing there
Probing /pci@4,4000 at Device 2 Nothing there
Probing /pci@4,4000 at Device 3 pci108e,1000 SUNW,hme
Probing /pci@4,4000 at Device 4 Nothing there
Probing /pci@4,4000 at Device 5 Nothing there
Probing /pci@4,2000 at Device 0 This slot excluded from probing...
Probing /pci@4,2000 at Device 1 Nothing there
Probing /pci@4,2000 at Device 2 Nothing there
Probing /pci@4,2000 at Device 3 Nothing there
Probing /pci@4,2000 at Device 4 Nothing there
Probing /pci@4,2000 at Device 5 Nothing there
不知道红色字体部分报错的是什么设备？ |
|
免费注册
发表于 2006-12-31 10:48