请各位帮助。。万分感谢

haozun

I've created a cluster, configured the nodes in the cluster, configured
the networks, and the adapters, and then when I try to Synchronize the
cluster configuration, I get the following error message :


cldare: Unable to connect to node


and


rshexec: cannot connect to node


I can rcp from one node to another, and from the nodes to themselves


I can also do an rlogin and rsh from one node to another


My /etc/hosts look like the following :


node1
node2
node1_priv
node2_priv


My /.rhosts looks like the following :


node1 root
node2 root
node1_priv root
node2_priv root


My /usr/es/sbin/cluster/netmon.cf contains the IP address of the nodes


My /usr/es/sbin/cluster/etc/rhosts file matches my /.rhosts file, which
both have the 600 permissions..


Any insight would be helpful..

我老婆黑社会

你HA怎么配的呢？

haozun

按ha标准文档做的。一步一步做，一台可以，一台死也不行

帅是帅了点

补丁是不是最新的，HA版本，操作系统版本

haozun

原帖由 帅是帅了点 于 2007-1-4 15:27 发表
补丁是不是最新的，HA版本，操作系统版本

是最新的。

RS9000

你确定一下，CLUSTER中所有IP LABEL在/etc/hosts都有定义，并且互相ping每个IP LABEL是通的

chinadns

系统环境是什么
clcomdES在不在
两边ha版本是否一致
在/usr/es/sbin/cluster/etc/rhosts写ip，别写label试试
还有你的smitty hacmp添加node时候的nodename 是什么