请教，看看我这样的机器可以安装flint或者flame学习吗

csdcn2000

1 300 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2048 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
VC3 rev A, CMAP rev F, Heart rev F
21" monitor (id 0xb)
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 72.24Hz (1280x1024_72)
Video Format Flags: (none)
Sync Disabled
Using Gamma Map 0
这个可以吗

csdcn2000

System: IP30
                Processor: 400 Mhz R12000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
     Secondary cache size: 2 Mbytes
              Memory size: 1024 Mbytes
                  Network: ef0 ethernet (100/10 base-T)
                SCSI Disk: scsi(0)disk(1)
                    Audio: RAD Audio Processor
                 Graphics: ESSI
>> version
PROM Monitor SGI Version 6.5 Rev 4.5 IP30 Sep 19, 2000 - 64 Bit
这个可不可以，希望大家帮我看看

sgi1991

flint 6/7 吧。要不然内存就小了。

sgigz

flame smoke都可以装 速度也很快
想当年我卖出去的195M的cpu 他们也是干这活

cathy12

不错>~~~支持～～～～