SCO Unixware7.11紧急求助

martionsun

今天在Intel S5000芯片组的平台上安装SCO Unixware711，安装网卡驱动时正常，但是在关机和启动时就会发现如下的错误提示，且网卡不能使用（Ping不通，插上网线后网卡灯亮但是不闪烁），我用的是板载网卡，型号为Intel 82563EB千兆以太网卡，请高手帮俺，谢谢了 ！！！！！


Apr 17 09:02:14 qgbak01 unix: WARNING: MOD Processing symbol table in module /etc/conf/mod.d/e1008g failed
Apr 17 09:02:14 qgbak01 unix:
Apr 17 09:02:14 qgbak01 unix: WARNING: MOD Processing symbol table in module /etc/conf/mod.d/e1008g failed
Apr 17 09:02:22 qgbak01 unix:
Apr 17 09:02:22 qgbak01 unix: WARNING: MOD Processing symbol table in module /etc/conf/mod.d/e1008g failed
Apr 17 09:03: 2 qgbak01 syslogd:cannot bind for transport udp:address in use
Ioctl: Network is unreachable
Add net 224.0.0.0 gateway 172.16.2.24: Network is unreachable
Apr 17 09:03:46 qgbak01 unix:
Apr 17 09:03:46 qgbak01 unix: WARNING: MOD Processing symbol table in module /etc/conf/mod.d/e1008g failed
Apr 17 09:03:50 qgbak01 unix:
Apr 17 09:03:50 qgbak01 unix: WARNING: MOD Processing symbol table in module /etc/conf/mod.d/e1008g failed
UX: init: INFO: New run level: 0
UX:/sbin/rco:INF0: The system is coming down. Please wait.
UX:K00ANNOUNCE: INFO: system services are now being stopped.
UX:K70eels: INFO: shutting down the enhanced Event logging system(EELS)
System has halted and may be powered off  (press any key to reboot)

martionsun

在线等啊等