X86 pxe自动安装问题，jumpstart不能继续

redeyes

jumpstart + PXE的x86安装服务器，大概配置如下:
sysidcfg :
-------
system_locale=zh
terminal=vt100
network_interface = e1000g0 { primary dhcp protocol_ipv6=no }
security_policy=none
name_service=none
timezone=Asia/Shanghai
timeserver=localhost
root_password=7zq5YxHBvBjX.
service_profile=limited_net

rules:
-------
any -  - profile -

profile:
-------
install_type initial_install
system_type standalone

cluster SUNWCXall

# format the entire disk for Solaris
fdisk all solaris all

# define how the disk is partitioned
partitioning explicit
filesys           rootdisk.s0 16144  /
filesys           rootdisk.s1 4096  swap
filesys           rootdisk.s7 free  /data0

# install systems as standalone
#system_type standalone


menu.lst;
-----------
default=0
timeout=3
title Solaris_10 Jumpstart X86
        kernel /I86PC.Solaris_10-1/multiboot kernel/unix -B install_config=xx.xx.xx.xx:/data1/config,sysid_config=xx.xx.xx.xx:/data1/config,install_media=xx.xx.xx.xx:/data1/install,install_boot=xx.xx.xx.xx:/data1/install/boot
        module /I86PC.Solaris_10-1/x86.miniroot


client通过pxe自动启动，一切正常，但是当进行完系统配置（网卡，hostname,timezone）后就停在开始安装的欢迎屏那里，需要next 才能继续 手动安装！手动

redeyes

自己顶下，Sun系统高手帮忙分析下..

aric

Did you run "check" script to create rules.ok file from rules?

redeyes

check 已经run 没有报错，
rules.ok 生成

czq1285

你看看哪些配置项是需要你手动输入的，说明这些配置没有在profile文件或者sysidcfg文件里面配好。

pobu

把你的menu.lst加上“ - install”：

kernel /I86PC.Solaris_10-1/multiboot kernel/unix - install -B install_config=xx.xx.xx.xx:/data1/config,sysid_config=xx.xx.xx.xx:/data1/config,install_media=xx.xx.xx.xx:/data1/install,install_boot=xx.xx.xx.xx:/data1/install/boot