- 论坛徽章:
- 0
|
内存512M,SWAP区留了800M,SCO5.0.5,内核共享内存320M,
MASTER:100M,采用了/dev/rmaster
tempmore:400M ,sybproces.dat:40M
/etc/suds_ctrl -a 100 已经加在S998www中
sybase 组号100,用户号200
SYBASE.cfg更改过如下:
total memory = 20480(从163840,81920,40960都不行),
number of locks = 15000,procedure cache percent=15
其他都是DEFAULT
sybinit 到最后boot时failed,errlog中内容如下:
kernel using configuation area from primary master device
kernel warning: using default file '/usr/sybase/SYBASE.cfg since
a configuration file was not specified ,specify a configuration file name
in the RUNSERVER file to avoid this message.
kernel using 110 file descriptors.
ulinitspinlock: allocate mutex lock failed
先谢了
[ 本帖最后由 woodley 于 2007-6-22 22:06 编辑 ] |
|