一个mc/sg的local domain name问题

liukai12345

各位，以下是我用cmquerycl命令生成cluster.ascii的时候，两台主机出现的情况（相关的
/etc/hosts，/etc/hosts.equiv，/.rhosts，/etc/cmcluster/cmclnodelist这些文件我都配制了，也能两台机器间用rcp的操作），还请高手相助！

host1# cmquerycl -n host2 -n host1 -v -C /etc/cmcluster/cluster.ascii
Warning: Unable to determine local domain name for host1
Looking for other clusters ... Done
Gathering storage information
Unable to connect to node host1: I/O error
Found 22 devices on node host2
Analysis of 22 devices should take approximately 5 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Found 4 volume groups on node host2
Analysis of 4 volume groups should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Note: Disks were discovered which are not in use by either LVM or VxVM.
      Use pvcreate(1M) to initialize a disk for LVM or,
      use vxdiskadm(1M) to initialize a disk for VxVM.
Gathering network information
Beginning network probing
Not probing node host1 as it is currently unreachable.
This may cause network partitions to be reported.
Completed network probing
Failed to gather configuration information.



host2# cmquerycl -n host2 -n host1 -v -C /etc/cmcluster/cluster.ascii
Warning: Unable to determine local domain name for host2
Looking for other clusters ... Done
Gathering storage information
Unable to connect to node host1: I/O error
Found 22 devices on node host2
Analysis of 22 devices should take approximately 5 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Found 4 volume groups on node host2
Analysis of 4 volume groups should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Note: Disks were discovered which are not in use by either LVM or VxVM.
      Use pvcreate(1M) to initialize a disk for LVM or,
      use vxdiskadm(1M) to initialize a disk for VxVM.
Gathering network information
Beginning network probing
Not probing node host1 as it is currently unreachable.
This may cause network partitions to be reported.
Completed network probing
Failed to gather configuration information.

wnzl

把hosts文件和rhost文件内容贴出来看看

leelangco

你机器的主机名就是host1和host2么？
另外/etc/hosts，.rhosts有没有错误的格式

pishafa

你本地解析是什么顺序？

czyf2001

查看：
dxmis-1:/#more .rhosts
dxmis-2         root
dxmis-1         root

dxmis-1:/#tail -f -n 5 /etc/hosts
#

127.0.0.1       localhost       loopback
10.212.102.90   dxmis-1
10.212.102.91   dxmis-2

你的.rhost 和hosts文件可以参考上面的.....

liukai12345

谢谢大家，原来是host1上的一些问题，重装系统后，问题解决。

wnzl

还要重装系统？