紧急求助：cacti抓不到数据的问题

大大狗

原帖由 剑心通明 于 2007-7-13 10:41 发表

cmd.php没问题了，我还在试cactid

网络在好好测试一下

geyun616

原帖由 HonestQiao 于 2007-7-13 10:44 发表


那就慢慢测试吧，试好了就好了。

原帖由 大大狗 于 2007-7-13 10:58 发表


网络在好好测试一下

yeah，剑心通明改做QA了

剑心通明

10.0.0.1-Cisco6509  Up 10.0.0.1 8.2 48.11 100%   
10.0.0.2-xxzxsilou  Unknown 10.0.0.2 0 0 100%   
10.0.0.4-lqxingzhenglou  Unknown 10.0.0.4 0 0 100%   
Localhost  Up 127.0.0.1 4.68 4.75 100%  
郁闷了啊，就核心能抓到数据，疯了，我还以为已经解决了哪，还不行

剑心通明

07/13/2007 11:35:01 AM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 11:35:02 AM - CMDPHP: Poller[0] Host[1] DS[3] WARNING: Result from CMD not valid.  Partial Result:
07/13/2007 11:35:02 AM - CMDPHP: Poller[0] Host[1] DS[4] WARNING: Result from CMD not valid.  Partial Result:
07/13/2007 11:35:04 AM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 11:35:05 AM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 11:35:07 AM - SYSTEM STATS: Time:6.4790 Method:cmd.php Processes:10 Threads:N/A Hosts:5 HostsPerProcess:1 DataSources:133 RRDsProcessed:69

geyun616

换到老版本

剑心通明

07/13/2007 02:20:00 PM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 02:20:01 PM - CMDPHP: Poller[0] Host[1] DS[3] WARNING: Result from CMD not valid.  Partial Result:
07/13/2007 02:20:01 PM - CMDPHP: Poller[0] Host[1] DS[4] WARNING: Result from CMD not valid.  Partial Result:
07/13/2007 02:20:03 PM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 02:20:04 PM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 02:20:05 PM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 02:20:06 PM - SYSTEM STATS: Time:6.3927 Method:cmd.php Processes:10 Threads:N/A Hosts:6 HostsPerProcess:1 DataSources:133 RRDsProcessed:69

Description** Status Hostname Current (ms) Average (ms) Availability  
10.0.0.1-Cisco6509  Up 10.0.0.1 8.39 22.73 100%   
10.0.0.2-xxzxsilou  Unknown 10.0.0.2 0 0 100%   
10.0.0.4-lqxingzhenglou  Unknown 10.0.0.4 0 0 100%   
10.0.0.99-xxzxbangong  Unknown 10.0.0.99 0 0 100%   
Localhost  Up 127.0.0.1 4.69 4.72 100%  

现在的问题是有个交换机可以，其他几个却死活不行了，同样的方法操作的，你说郁闷不郁闷

geyun616

原帖由 剑心通明 于 2007-7-13 14:27 发表
07/13/2007 02:20:00 PM - CMDPHP: Poller[0] ERROR: Either there are no items in the cache or polling is disabled
07/13/2007 02:20:01 PM - CMDPHP: Poller[0] Host[1] DS[3] WARNING: Result from CMD  ...

呵呵，有没试过把不能采集的节点删了重新加？

剑心通明

原帖由 geyun616 于 2007-7-13 19:48 发表

呵呵，有没试过把不能采集的节点删了重新加？

删除、添加好几次了

剑心通明

用debug模式看一个图，提示：
RRDTool Command:

/usr/local/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="10.0.0.099-xxzxbangong - Traffic - Ethernet1/0/1" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bytes per second" \
--slope-mode \
AREA:#00CF00:"Inbound"  \
GPRINT::LAST:" Current\:%8.2lf %s"  \
GPRINT::AVERAGE:"Average\:%8.2lf %s"  \
GPRINT::MAX:"Maximum\:%8.2lf %s\n"  \
LINE1:#002A97:"Outbound"  \
GPRINT::LAST:"Current\:%8.2lf %s"  \
GPRINT::AVERAGE:"Average\:%8.2lf %s"  \
GPRINT::MAX:"Maximum\:%8.2lf %s"
RRDTool Says:

ERROR: parameter '#00CF00' does not represent a number in line AREA:#00CF00:Inbound

huifeideluotuo

卷土重来！