- 论坛徽章:
- 0
|
呃 小弟最近搞一台V490，是用SG-XPCI2FC-QF2-Z 这个光纤卡接3510.
以下是启动信息
Hardware Power On
Probing core system FRUs.. Done
Executing POST w/%o0 = 0000.0800.0101.2041
0:0>
0:0>@(#) Sun Fire[TM] V480/V490 POST 4.15.6 2005/01/06 10:48
/dat/fw/common-source/firmware_re/post/post-build-4.15.6/Camelot/cstone/integrated (firmware_re)
0:0>Copyright ?2005 Sun Microsystems, Inc. All rights reserved
SUN PROPRIETARY/CONFIDENTIAL.
Use is subject to license terms.
0:0>Jump from OBP->POST.
0:0>Diag level set to MIN.
0:0>Verbosity level set to NORMAL.
0:0>
0:0>Start selftest...
0:0>CPUs present in system: 0:0 1:0 2:0 3:0
0:0>Test CPU(s)....Done
0:0>Init Scan/I2C....Done
0:0>Basic Memory Test....Done
0:0>Memory Block....Done
0:0>IO-Bridge Tests....Done
0:0>Enable Errors....Done
0:0>INFO:
0:0> POST Passed all devices.
0:0>POST: Return to OBP.
POST Reset
Enabling system bus....... Done
Probing Memory............ Done
Initializing CPUs......... Done
Initializing boot memory.. Done
Initializing OpenBoot
Probing system devices
Probing I/O buses
Probing system devices
Probing I/O buses
Sun Fire V490, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.15.6, 16384 MB memory installed, Serial #70986301.
Ethernet address 0:14:4f:3b:2a:3d, Host ID: 843b2a3d.
Running diagnostic script obdiag/normal
Testing [url=]/pci@9,600000/SUNW,qlc@2[/url]
Testing [url=]/pci@9,700000/ebus@1/i2c@1,2e[/url]
Testing [url=]/pci@9,700000/ebus@1/i2c@1,30[/url]
Testing [url=]/pci@9,700000/ebus@1/bbc@1,0[/url]
Testing [url=]/pci@9,700000/ebus@1[/url]
Testing [url=]/pci@9,600000/network@1[/url]
Testing [url=]/pci@9,700000/network@2[/url]
Testing [url=]/pci@9,700000/usb@1,3[/url]
Testing [url=]/pci@9,700000/ebus@1/pmc@1,300700[/url]
Testing [url=]/pci@9,700000/ebus@1/rtc@1,300070[/url]
{3} ok probe-scsi-all
[url=]/pci@9,600000/SUNW,qlc@2[/url]
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 21000014c3e84bed SEAGATE ST314670FSUN146G055A
1 1 0 21000014c3e84bef SEAGATE ST314670FSUN146G055A
[url=]/pci@8,600000/SUNW,qlc@1,1[/url]
Fast Data Access MMU Miss
{3} ok boot -r
Boot device: [url=]/pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000014c3e84bed,0:a[/url] File and args: -r
SunOS Release 5.9 Version Generic_117171-07 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: qlc(3): failed to initialize adapter
WARNING: qlc(4): failed to initialize adapter
configuring IPv4 interfaces: ce0.
Hostname: v490
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is logging.
starting rpc services: rpcbind done.
Setting netmask of ce0 to 255.255.255.192
Setting default IPv4 interface for multicast: add net 224.0/4: gateway v490
syslog service starting.
Aug 3 15:37:31 v490 sendmail[215]: My unqualified host name (v490) unknown; sleeping for retry
Aug 3 15:37:31 v490 sendmail[214]: My unqualified host name (v490) unknown; sleeping for retry
volume management starting.
The system is ready.
v490 console login:
到现场就有以上类似的报错信息，我开始怀疑是驱动问题。
重新安装了系统 打了SAN的的PATCH，还是一样的报错。
后来开CASE换了块光纤卡，结果还是一样。。郁闷
把卡拔下来后就没有报错信息了
我换过插槽，升了OBP 情况依旧。。。
prtdiag -v 里面能认到这块光纤卡
找不到3510，我确保3510的设置都是对的。。。
我看文档说 装Sun StorEdge PCI Dual Fibre-Channel Host Adapter Card
有个步骤是Connect the two internal Loop B cables to the Sun StorEdge PCI Dual Fibre-Channel Host Adapter’s internal connectors and the FC-AL backplane.
不知道这个Loop B cables是不是V490装光纤卡上面必须要连的，我看介绍说这个线是另外配的？我现在疑问在这里。。。
不知道哪位大侠有没有碰过类似的事情。。。
请各位大侠指教。。。救急。。。 |
|
免费注册
发表于 2007-08-03 22:30
117171-07的核心已经蛮新了嘛...
