- 论坛徽章:
- 0
|
luxadm d显示一些，看不懂，请帮忙解析一下
root@SunserverA # luxadm display d
SENA
DISK STATUS
SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN)
0 On (O.K.) 20000004cfa3c631 On (Bypassed:AB)
1 On (O.K.) 20000004cfa3c7ad On (O.K.) 20000004cfa3c7e5
2 On (O.K.) 20000004cfa3c6f6 On (O.K.) 20000004cfa3c79c
3 Not Installed On (O.K.) 20000004cfb509ac
4 Not Installed On (O.K.) 20000004cfa3f308
5 On(Not Readable) 20000004cf729d4b On (O.K.) 2000002037e2f731
6 On (O.K.) 20000020372a3783 On (O.K.) 2000002037aca6f2
SUBSYSTEM STATUS
FW Revision:1.09 Box ID:3 Node WWN:50800200000e44d0 Enclosure Name:d
Power Supplies (0,2 in front, 1 in rear)
0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02)
Fans (0 in front, 1 in rear)
0 O.K.(rev.-04) 1 O.K.(rev.-00)
ESI Interface board(IB) (A top, B bottom)
A: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Failed(mod.-05): Not receiving a signal
B: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Failed(mod.-05): Not receiving a signal
Disk backplane (0 in front, 1 in rear)
Front Backplane: O.K.(rev.-04)
Temperature sensors (on front backplane)
0:33篊 1:34篊 2:33篊 3:33篊 4:33篊 5:33篊
6:34篊 (All temperatures are NORMAL.)
Rear Backplane: O.K.(rev.-04)
Temperature sensors (on rear backplane)
0:33篊 1:34篊 2:33篊 3:33篊 4:33篊 5:34篊
6:34篊 (All temperatures are NORMAL.)
Interconnect assembly
O.K.(rev.-02)
Loop configuration
Loop A is configured as a single loop.
Loop B is configured as a single loop.
Language USA English |
|
免费注册
发表于 2007-03-08 17:36
