ChinaUnix.net
相关文章推荐:

gdb watch

我这里watch是对一个局部变量的。 [code] (gdb) l 1 int j=12; 2 int main() 3 { 4 int a=10;//a=10 5 a=a+10;//a=20 6 j += 1; 7 return 0; 8 } 9 (gdb) b 5 Breakpoint 1 at 0x804839c: file 2.c, line 5. (gdb) r Starting program: /tmp/a.out Breakpoint 1, main () at 2.c:5 5 ...

by cjaizss - C/C++ - 2007-05-14 21:31:54 阅读(2570) 回复(3)

相关讨论

gdbwatch变量时,出现警告如下: [code] warning: watchpoint length 16 unsupported, using lenght = 4 warning: watchpoint length 272 unsupported, using lenght = 4 warning: watchpoint length 936 unsupported, using lenght = 4 [/code] 此时watch变量失败,请问应该如何处理?

by wangrujun - C/C++ - 2004-02-10 09:46:45 阅读(779) 回复(0)

watch -d ls -l

by wugang11 - Shell - 2004-09-15 14:09:55 阅读(725) 回复(2)

在BSD下我执行watch P3显示watch: fatal: cannot open snoop device 可我在内核里添加了pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. 为什么还会这样?? 我/stand/sysinstall 安装了SNOOPER 可不知道怎么启动 显示没配置什么的:( 请HELP ME !!!!!!!!!!

by km - BSD - 2003-06-25 22:49:48 阅读(1685) 回复(15)

哪位知道 在接口下 dialer watch-group 1 这里1 要不要做个dialer watch-list 1 ,或者是怎么用啊?

by havelq - 网络技术 - 2003-05-28 09:18:12 阅读(802) 回复(0)

file a.out list 在使用gdb调试程序时想要列出源代码但报错: 1 ../sysdeps/i386/elf/start.S:没有那个目录或文件 in ../sysdeps/i386/elf/start.S 不知是什么原因

by wangxiaoguang - C/C++ - 2008-08-02 08:35:49 阅读(1683) 回复(8)

FreeBSD的watch命令与Linux下的watch命令完全不一样。 FreeBSD下的watch命令是查看其它用户的正在运行的操作,而linux下的watch是自动定时运行一个(一行)命令。 下面是FreeBSD下的watch命令的介绍: watch — snoop on another tty line watch允许你偷看其它terminal正在做什么,该命令只能让超级用户使用。 为什么要用watch? 有时候,基于安全的目的,你可以用watch看某个用户在干什么。也许你发现你的机器被某人黑了,你想看...

by iakuf - BSD文档中心 - 2006-09-19 09:57:49 阅读(1002) 回复(0)

我输入watch会有下面的错误 watch: snp module not available: Operation not permitted watch: open /dev/snp0: No such file or directory 不知道为什么!

by kanhu - BSD - 2005-12-26 16:41:59 阅读(1104) 回复(3)

葱头 写于2004.1 Uniation Network 有时候我们想看看一些用户正在做什么,特别是一些有嫌疑的帐户。查阅history当然可以,但这并不直接,我们希望实时反映在我们屏幕上,watch可以帮我们。 1、编辑核心增加pseudo-device snp hpserver# cp /sys/i386/conf/GENERIC /sys/i386/conf/DELAND hpserver# vi /sys/i386/conf/DELAND # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (...

by 葱头 - BSD - 2004-02-16 11:27:03 阅读(3126) 回复(4)