ChinaUnix.net
相关文章推荐:

squid 命中率 scalarawk

RHEL4X86_64 apache2.2.10+squid-2.6.STABLE22 全静态页面 apache采用deflate 压缩 [code] DeflateCompressionLevel 7 AddOutputFilterByType DEFLATE text/html text/plain text/xml AddOutputFilter DEFLATE css js [/code] squid 增加 通用的配置 增加 [code]cache_vary on[/code] 下面是squid client info出来的信息 squid Object Cache: Version 2.6.STABLE22 Start Time: Thu...

by molecar - 服务器应用 - 2009-04-30 10:43:39 阅读(4345) 回复(9)

相关讨论

./squidclient mgr:info 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/4255/showart_241779.html

by 若水 - BSD文档中心 - 2007-02-02 08:13:32 阅读(1066) 回复(0)

环境:squid 2.6 web ,图片什么的都是一台机器上。缓存所有文件 Connection information for squid: Number of clients accessing cache: 19 Number of HTTP requests received: 5567 Number of ICP messages received: 0 Number of ICP messages sent: 0 Number of queued ICP replies: 0 Request failure ratio: 0.00 Average HTTP requ...

by liang3391 - 服务器应用 - 2009-08-01 16:58:39 阅读(2371) 回复(2)

大家好,我的squid+mysql服务器搭建好以后,我想查看命中率,但是按照网上的方法发现有问题,请高手指点! 添加配置: acl manager proto cache_objectacl acl localhost src 127.0.0.1/255.255.255.255 http_access allow manager localhost 不知道是否还有其他地方要设置,请高手指点,谢谢! 我用命令:/usr/local/squid/bin/squidclient -p 3128 mgr:info查看命中率,但是返回错误如下: [root@zhang var]# /usr/local/squid...

by 飞鸿无痕 - 服务器应用 - 2009-06-02 17:02:39 阅读(5976) 回复(8)

在同一台服务器上做了apache和squid,针对本机虚拟主机做加速,squid反代理命中率比较高,但是服务器负载却比较高,比没有做squid之前要高很多,特别是CPU占用要高得多,高峰时段netstat -an时,TIME_WAIT能达到10000多,请问大家有什么高见!

by zzylq - 服务器应用 - 2005-08-31 15:17:52 阅读(1752) 回复(3)

Cache information for squid: Hits as % of all requests: 5min: 40.7%, 60min: 25.0% Hits as % of bytes sent: 5min: 14.7%, 60min: 14.9% Memory hits as % of hit requests: 5min: 0.0%, 60min: 33.1% Disk hits as % of hit requests: 5min: 0.0%, 60min: 3.3% Storage Swap size: 6908 KB Storage Swap capacity: 0.1% used, 99.9% free ...

by cnbird - 服务器应用 - 2010-03-31 10:00:38 阅读(4707) 回复(9)

squidclient -P 3128 mgr:info squidclient: can't open file ((2) No such file or directory) 该如何解决?

by kingduanlian - 服务器应用 - 2009-08-26 14:40:33 阅读(2842) 回复(7)

[code]我的系统是FreeBSD的,squid2.6 反向代理[/code] [code] HTTP/1.0 200 OK Server: squid/2.6.STABLE16+ICAP Date: Wed, 23 Jul 2008 08:23:15 GMT Content-Type: text/plain Expires: Wed, 23 Jul 2008 08:23:15 GMT Last-Modified: Wed, 23 Jul 2008 08:23:15 GMT X-Cache: MISS from image.bade.com X-Cache-Lookup: MISS from image.bade.com:80 Via: 1.0 image.bade.com:80 (squid/2.6.STABLE16+ICAP) Connection: close...

by kevinadmin - 服务器应用 - 2008-11-28 17:41:48 阅读(7395) 回复(14)

Total Accesses: 116937 Average Accesses: 4872.37 per hour Total Cache Hits: 27995 Average Cache Hits: 1166.45 per hour % Cache Hits: 23.94 % Total Cache IMS Hits: 18711 Average Cache IMS Hits: 779.62 per hour Total Cache Misses: 39816 Average Cache Misses: 1659 per hour % Cache Misses: 34.04 % 这个是我用 squidgraph 测试的我的squid命中率 23.94 % 的命中率是不是比较低呀 我的squid是做...

by pengyt141 - 服务器应用 - 2007-12-24 12:53:27 阅读(3524) 回复(2)

[root@localhost bin]# ./squidclient mgr:info client: ERROR: Cannot connect to localhost:3128: Connection refused 我装的是squid2.6,端口是默认的3128.请问命中率怎么看?先谢谢了!

by orangemm - 服务器应用 - 2009-07-06 00:55:01 阅读(11133) 回复(11)

小弟刚刚接触squid,看见别人贴图出来的squid内存命中率都是很高的(60%以上的命中),但自己的内存命中率就是0. squid是centos5.2自带的,作为反向代理,请问各位高手应该配置squid.conf的哪项可以让内存命中率提升?能否贴出案例配置?在此先谢谢啦! [ 本帖最后由 qick939 于 2009-7-6 15:34 编辑 ]

by qick939 - 服务器应用 - 2009-07-06 15:29:50 阅读(2185) 回复(0)