指令:e2fsck 使用权限 : 超级使用者 使用方式 : e2fsck [-pacnydfvFV] [-b superblock] [-B blocksize] [-l|-L bad_blocks_file] [-C fd] device 说明 : 检查使用 Linux ext2 档案系统的 partition 是否正常工作 参数 : device : 预备检查的硬盘 partition,例如:/dev/sda1 -a : 对 partition 做检查,若有问题便自动修复,等同 -p 的功能 -b : 设定存放 sup...
by shijiang1130 - Linux文档专区 - 2007-11-11 13:55:06 阅读(496) 回复(0)
下面是ulk3中的一段话 updates to filesystem blocks might be kept in dynamic memory for long period of time before being flushed to disk. A dramatic event such as a power-down failure or a system crash might thus leave the filesystem in an inconsistent state. To overcome this problem, each traditional Unix filesystem is checked before being mounted; if it has not been properly unmounted, then a spec...
fsck是为检查各种不同的文件系统提供一个统一的用户界面。 e2fsck是用于ext2/ext3类型的文件系统检查的一个工具。 仅仅如此区别,我在网上搜索了大半天都没有找到结果,最后却是用man比较的时候比较出来了。太笨了!!! 但是在网上找到了关于这两个命令的用法: fsck 使用方式 : fsck [-sACVRP] [-t fstype] [--] [fsck-options] filesys [...] 说明 : 检查与修复 Linux 档案系统,可以同时检查一个或多个 Linux 档案...
red hat as 3 的系统, 想做一下磁盘扫描, 文件系统用的是ex3, 我现在不知道是用e2fsck 还是 fsck来做扫描, 还有,一个30G的硬盘一般要耗时多长, 空间用了4G左右, 请有经验的大哥指点, TIA
red hat as 3 的系统, 想做一下磁盘扫描, 文件系统用的是ex3, 我现在不知道是用e2fsck 还是 fsck来做扫描, 还有,一个30G的硬盘一般要耗时多长, 空间用了4G左右, 请有经验的大哥指点, TIA
e2fsck 使用方法 指令:e2fsck 使用权限 : 超级使用者 使用方式 : e2fsck [-pacnydfvFV] [-b superblock] [-B blocksize] [-l|-L bad_blocks_file] [-C fd] device 说明 : 检查使用 Linux ext2 档案系统的 partition 是否正常工作 参数 : device : 预备检查的硬碟 partition,例如:/dev/sda1 -a : 对 partition 做检查,若有问题便自动修复,等同 -p 的功能 ...
My old os version is Fedora core 3,now I have change it to RHEL AS3 U8. But when the system boot,it can't fsck the old partitions: fsck 1.32 e2fsck 1.32 e2fsck:Get a newer version of e2fsck! I think I should download a newer version,such as below: e2fsprogs-devel-1.35-11.2 e2fsprogs-1.35-11.2 but i only found it for RHEL4(kernel 2.6).Is it ok for RHEL3(kernel 2.4)? if not ,what should do? thank...
My old os version is Fedora core 3,now I have change it to RHEL AS3 U8. But when the system boot,it can't fsck the old partitions: fsck 1.32 e2fsck 1.32 e2fsck:Get a newer version of e2fsck! I think I should download a newer version,such as below: e2fsprogs-devel-1.35-11.2 e2fsprogs-1.35-11.2 but i only found it for RHEL4(kernel 2.6).Is it ok for RHEL3(kernel 2.4)? if not ,what should do? thank...