board 配置的platformdevice 驱动调用
最近签一笔业务，客户订购一款至强四款E5310，SAS73G双硬盘做RAID1，我们选用的Intel S5000VSA 主板，RAID配置很多朋友会遇到一些困难，现在我把这款主板的RAID配置方法写出来，希望给以后碰到此类问题提供帮助。 Intel Server board S5000VSA(sas)主板RAID1配置方法 1.按F2进入BIOS 2.进入Advanced 将SAS controller 和contigure SAS as SW raid 都设为enable 3.重启电脑按ctrl+E进入raid 配置界面，如果看不到ctrl+E一般是因...
看文档上说，这个函数没有export给模块使用，需要在平台代码中调用注册 i2c_board_info[] 中的设备； 这里说的平台代码只的是哪里啊？？？
By Peter Seebach , Freelance 28 Sep 2006 As an MP3 and MPEG player, the Hauppauge MediaMVP lets you play digital media through your television set. As a tightly purposed embedded device, it is an excellent example of a compact Linux implementation on minimal hardware. Although I've seen smaller embedded Linux systems than the Hauppage MediaMVP, it is the smallest non-handheld, and it's one of t...
Dear All : 開機時出現 Clock board TOD does not match TOD on any IO board,最後出現 login incorrect,please try again.然後一直停在這畫面,不能登入,我該怎麼辦,Thanks
Dear All :\r\n 開機時出現 Clock board TOD does not match TOD on any IO board,最後出現 login incorrect,please try again.然後一直停在這畫面,不能登入,我該怎麼辦,Thanks
我现在有台E3500开机时显示上面的信息(如题), 但能正常启动, 如何能使时钟板的TOD与IO板的TOD相互MATCH??
我现在有台E3500开机时显示上面的信息(如题), 但能正常启动, 如何能使时钟板的TOD与IO板的TOD相互MATCH??
T5220 机器Messages消息经常有这个是怎么回事. 有两个网卡. Jun 24 20:01:45 T5220 iphase: [ID 851982 kern.notice] Testing board memory: las0p:c1e1c000 las0b:4000000 las0l:4000000 p:c211c000 tad dr:0 Jun 24 20:01:45 T5220 iphase: [ID 246722 kern.notice] board memory ok
Quick Test : Without having the JTAG connected to the target board, you should see something like this printed out: joseph@joseph-linux:/usr/local/lib/openocd/interface$ openocd Open On-Chip Debugger 0.2.0-in-development (2009-05-11-06:41)svn:1657M BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS $URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $ jtag_speed: 0 Warn : Tap/De...
