kvm pxe boot
如何用linux的pxe系统启动DOS？ 所需文件： memdisk: copy from /usr/lib/syslinux/memdisk to /tftpboot dos.img: DOS启动软盘的镜像文件 修改pxelinux.cfg,添加 LABEL dos menu label dos kernel memdisk append initrd=bootimg/dos/dos.img 本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/13393/showart_2104342.html
by James_Guan - Linux文档专区 - 2009-11-26 10:47:16 阅读（2051） 回复（0）
pxe-boot HOWTO [email=pxe-boot-howto_@_Think-Future.de]Nils Radtke[/email] v1.3, February 2005: May be outdated. Before working with this HOWTO, take into account that the underlaying principles are still valid. Although this version is actually a preliminary translated version of the following HOWTO: CD-Net-Install-HOWTO , which is in fact published in german language yet. ...
我想用ISCSI boot WINDOWS DISKLESS ，不知道可以不可以，有没有哪位做过 ？我用FC7 做SERVER 上面装了ISCSI-TARGET ，我不知道pxeLINUX。CFG/DEFAULT文件怎么写 客户端如何使用ISCSI连接SERVER 有高手帮我讲讲吗？谢谢
前言: 做完了pxe-nfs-boot,当然要尝试一下ramdisk了。而且其优势也比nfs大。 正文: 1.原理 当然先找一个现成的项目来拷贝学习了。我选择的是minimyth。其必备的文件有两个一个是内核kernel;另一个是rootfs。各有其要求: kernel:支持ramdisk和initrd RAM rootfs:其实就是一个initrd 从pxelinux.cfg/default文件可看出一些线索。 default minimyth prompt 1 timeout 0 LABEL minimyth k...
hi all, im trying to setup a diskless environnement with Fedora. I use etherboot (as a bootable CDROM) to load linux kernel via pxe. I have a dhcp, nfs and a tftp server working properly. I have rebuild a 2.6.9-1.667_FC3 fedora kernel I have rebuild a kernel (as an rpm, or via make bzImage), with the NFSROOT option, to allow / mounting via NFS pxelinux.0 boot normaly, load the kernel and the init...
hi all, im trying to setup a diskless environnement with Fedora. I use etherboot (as a bootable CDROM) to load linux kernel via pxe. I have a dhcp, nfs and a tftp server working properly. I have rebuild a 2.6.9-1.667_FC3 fedora kernel I have rebuild a kernel (as an rpm, or via make bzImage), with the NFSROOT option, to allow / mounting via NFS pxelinux.0 boot normaly, load the kernel and the init...
安装UBUNTU时由于分区不对,所以只能点终止安装,可是重启计算机后出现pxe-E53:no boot filename received 然后又出现pxe-MOF:exiting pxe rom operating system not found字样，现在系统进不去，请帮帮忙
09.18 A,B两台PC-SERVER,均有一块Intel 100Pro/B网卡(iprb),安装时均可识别并可正常使用 两机主板均集成Intel 1000M网卡(e1000g),驱动从intel网站上下载,INTCGigaE.pkg,也可正常使用 现在A机安装Solaris 8(02/02),选最大安装. 网卡iprb & e1000g均正常. 在启动in.rarpd时,报错/dev/e未找到,估计e1000g驱动问题,因此将e1000g unplumb(也试过在BIOS中关闭), 只留iprb,可以正常启动in.rarpd.(/etc/hosts,/etc/ehters都已设置) B机开...
Setting up a pxe-boot Server Written by Net Llama! on 17-Sept-2005 This documents how to setup a pxe boot server for Linux. This assumes that you're using Redhat/FC as the pxe boot server. The vast majority of the information has been obtained from the following webpages: http://dev.brantleyonline.com/wiki/index.php/General_Network_%28pxe%29_booting http://dev.brantleyonline.com/wiki/index.php/pxe...
服务器配置文件： /etc/dhcpd.conf ddns-update-style interim; ignore client-updates; allow booting; allow bootp; subnet 192.168.0.0 netmask 255.255.255.0 { # --- default gateway option routers 192.168.0.1; option subnet-mask 255.255.255.0; option nis-domain "domain.org"; option domain-name "domain.org"; ...
服务器配置文件： /etc/dhcpd.conf ddns-update-style interim; ignore client-updates; allow booting; allow bootp; subnet 192.168.0.0 netmask 255.255.255.0 { # --- default gateway option routers 192.168.0.1; option subnet-mask 255.255.255.0; option nis-domain "domain.org"; option domain-name "domain.org"; ...
