ChinaUnix.net
相关文章推荐:

openwrt network interfaces

已经在网上找了很久资料,就是找不到方法,希望懂行的指点一下。 FreeBSD 6.2,运行大半年都很正常,估计前天将几十G文件拷贝到移动硬盘备份造成的?昨天不正常后的,一查日志,发现问题挺严重的。换过网线试过了。 #cat /var/log/samba/log.nmbd [2009/06/13 10:10:46, 0] lib/interface.c:load_interfaces(229) WARNING: no network interfaces found [2009/06/13 10:10:51, 0] lib/interface.c:load_interfaces(229) WA...

by 鹰仔 - BSD - 2009-06-15 18:00:43 阅读(3232) 回复(2)

相关讨论

About redundant interfaces You can combine two or more physical interfaces to provide link redundancy, to ensure that Internet services remain active if one physical interface fails. You can set up this feature on any FortiGate unit that has two spare interfaces. For example, if you have two Internet services connected to a FortiGate unit, T1 on Wan 1 and DSL on Wan 2, you can configure Wan 2 to ...

by bu - 网络技术文档中心 - 2006-08-14 09:28:29 阅读(508) 回复(0)

About redundant interfaces You can combine two or more physical interfaces to provide link redundancy, to ensure that Internet services remain active if one physical interface fails. You can set up this feature on any FortiGate unit that has two spare interfaces. For example, if you have two Internet services connected to a FortiGate unit, T1 on Wan 1 and DSL on Wan 2, you can configure Wan 2 to ...

by bu - 网络技术文档中心 - 2006-08-14 09:26:59 阅读(597) 回复(0)

Could anyone give me a help? how to find out the unused network interfaces in solaris? many thanks!

by lakemba - Solaris - 2006-02-03 22:26:32 阅读(1025) 回复(1)

In the U.S., the telephone company provides its BRI customers with a U interface. The U interface is a two-wire (single pair) interface from the phone switch, the same physical interface provided for POTS lines. It supports full-duplex data transfer over a single pair of wires, therefore only a single device can be connected to a U interface. This device is called an network Termination 1 (NT-1)....

by linqo - 网络技术文档中心 - 2007-12-21 04:47:40 阅读(524) 回复(0)

既然安装了openwrt,那么让它为你工作。 先说一些基础状况  1.Kamikaze 方式下的openwrt是默认关闭无线设备的,所以首先必须要开启  2.路由器的WAN口无法工作,但Modem可以拨号  3.现有一个基于Linksys+ddwrt 的无线网络  4.没有找到nvram开启无线模块参数,所以必须通过其他途径  5.在完成所有设置、以及测试之前,不要修改密码  6.准备一个putty程序,用来ssh 思路  1.必须让openwrt设备连入internet,否则后续工作无...

by tsengtim - 网络技术文档中心 - 2009-04-05 00:05:18 阅读(1874) 回复(0)

如何使用   telnet登录openwrt后,第一次使用nvram的话,尝试一下 nvram show 命令(加上回车),将列出所有的nvram参数。   第二步仍然是尝试一下,用 nvram get flash_type 看看FLASH芯片是什么型号的,但这台7231-4p却无法看到型号。   我这里学习nvram的主要目的是用来设置的,设置命令是 nvram set ,完整的写法是“nvram set 参数=值”,我用一个例子说明。   参数设置后,必须使用 nvram commit 进行保存,如...

by tsengtim - 网络技术文档中心 - 2009-04-04 23:10:15 阅读(2926) 回复(0)

  网络上关于Open-Wrt完整的教程没有多少,尝试自己整理一下。   open-wrt是一个小型的Linux系统,正因为如此,Open-wrt可以刷在非常多的路由器和设备,比如网络硬盘。另外由于open-wrt一开始就会把整个系统的控制权限交给用户,因此比较番茄和ddwrt,自由度最高。   首先确定路由器或者其他是否设备是否支持,这里判断的标准应该就是CPU型号,这个是官方地址,看看Device Manufacturers 小节,查找一下自己设备的制造...

by tsengtim - 网络技术文档中心 - 2009-04-04 09:21:17 阅读(2112) 回复(0)

关于WRT54G改造的好文,好站,所以转过来,呵呵。 1. 关于 openwrt 当Linksys 释放 WRT54G/GS 的源码后,网上出现了很多不同版本的 Firmware 去增强原有的功能。大多数的 Firmware 都是99%使用 Linksys的源码,只有1%是加上去的,每一种 Firmware 都是针对特定的市场而设计,这样做有2个缺点,第一个是难以集合各版本Firmware的长处,第二个是这版本距离 Linux 正式发行版越来越远。 openwrt 选择了另一条路,它从零开始,一点一...

by joiner - 网络技术文档中心 - 2006-03-06 21:38:31 阅读(1144) 回复(0)

wo can give me some network books! thanks

by huangbaixiang - 网络技术 - 2007-07-04 10:22:06 阅读(1431) 回复(1)

你上一次安装的时候是不是也安装了可户端什么的,, 如果是,那么把你的机器,从现在的工作组,或者域中退出来,有在安装,安装好了,在设置网络。 试试看!!

by dlboy-ygs - DB2 - 2003-04-23 08:59:56 阅读(1334) 回复(0)