ChinaUnix.net
相关文章推荐:

linux驱动安装

我想装一下965显卡的驱动,解压后不知道怎么编译文件.我把解压后的文件解图给你们,应该是编译哪个文件呢,我刚接触linux.

by wqf142322 - Linux新手园地 - 2008-04-14 10:45:41 阅读(1537) 回复(3)

相关讨论

第一次使用linux 选择的版本是F10 装完后没有声音,那些系统自带的电影播放器 MP3播发器都不能用 也不知道有没有安装声卡,显卡驱动等~~ 请问在linux下如何安装驱动程序? 为什么电影MP3都不能放呢? yum -y install xmms yum -y install mplayse 都出现说 锁以被用 /var/run/yum.pid 另外的一个复制正在运行PID位2147; 另一个程序正在使用yum锁;等待退出 我KILL了这个进程,还是一样的提示~~~

by wj2 - Linux新手园地 - 2009-01-15 14:31:27 阅读(1373) 回复(1)

电脑: AMD 4400+,内存DDR2 3G,主板 :NVIDIA Force 550 显卡: ATI X1300XT ATI显卡测试的linux有: Ubuntu 7.04-8.04,Debian lenny,testing,Centos 5.1,FC9, 一句话,手动加载驱动 步骤:1,安装系统后,做一些必要的更新,apt-get update,apt-upgrade,主要是有新的内核,更新内核。 2,安装必要的文件,如debian:apt-get install debhelper kernel-package fakeroot,ubuntu:apt-get install gcc-3.4 module-assistant buil...

by cnsonky - Linux文档专区 - 2008-06-11 02:10:58 阅读(708) 回复(0)

The ATi and nVIDIA driver RPMs provided by livna.org are especially designed for Fedora. If you are using yum and already have it configured with the Livna repository for your Fedora version, you can skip this section. If not, add the Livna repository by executing the following command as root: # rpm -Uhv http://rpm.livna.org/livna-release-6.rpm Next, import the Livna GPG Key: # rpm --import htt...

by csbbb - Linux文档专区 - 2008-05-27 19:34:55 阅读(431) 回复(0)

今天电话到里仁公司,告知可能是显卡驱动的问题,建议到ATI上寻找驱动. 还好,在 ATI主页上 寻到了一项帮助. linux下使用ATI的知识库 [color="#000066"]ATI安装的指南:ATI Proprietary linux Driver Installer 正在下载驱动,希望能够起到作用了。为什么呢,还得从我买的DELL机器说起,朝DELL撒气之后仍然不能解决问题,他们的技术帮助听耐心的解说他们怎么怎么没有受到过相关培训,无法提供linux的帮助。所以只能自己动手了。 -OK下载...

by wanghanze - Linux文档专区 - 2005-12-27 23:55:47 阅读(863) 回复(0)

我下载了一个驱动文件,解压缩以后,有一个install.sh的文件我运行了install可是告诉我缺少参数,请问都加什么参数。我要安装的是865的显卡驱动。我装的是Red Hat 9.0

by handys - 系统管理 - 2004-01-04 20:50:48 阅读(1193) 回复(5)

我下载了一个驱动文件,解压缩以后,有一个install.sh的文件我运行了install可是告诉我缺少参数,请问都加什么参数。我要安装的是865的显卡驱动。我装的是Red Hat 9.0

by handys - Linux系统管理 - 2004-01-04 20:50:48 阅读(1262) 回复(5)

linux系统下安装PCI网卡驱动失败,求高手指点,谢谢! 系统报如下错误, /root/2.4.x_2.6.x/src/r1000_n.c:378:error:expected ')' before string constant make[3]:*** [/root/2.4.x_2.6.x/src/r1000_n.o] Error 1 make[2]:*** [_module_/root/2.4.x_2.6.x/src] Error 2 make[1]: Leaving directory '/root/2.4.x_2.6.x/src' make[1]: *** [modules] Error 2 make[1]: Leaving directory '/root/2.4.x_2.6.x/src make: *** [modul...

by tianya0219 - Linux系统管理 - 2012-07-23 20:05:02 阅读(1060) 回复(1)

系统环境 操作系统 : RHEL5.0 设备 DL580G5 HBA 卡:Qlogic 2343 连接存储: EVA8100 ---------------------------------------------------------------------------------- HBA 卡 HP 网站下载地址: ftp://ftp.hp.com/pub/softlib/software10/COL19426/co-74973-1/hp_qla2x00-2009-03-17.tar.gz ftp://ftp.hp.com/pub/softlib/software10/COL28061/co-69719-2/hp-fc-enablement-2009-09-02.tar.gz 具体安装方法: 1、确认已经...

by laigq - Linux文档专区 - 2009-11-05 19:52:14 阅读(1488) 回复(0)

在red hat enterprise ver.3.0下安装请依照以下的步骤,于red hat enterprise ver.3.0作业系统下安装intel ich7r lsi logic embedded sata raid控制晶片的驱动程式: 1.使用red hat作业系统安装光碟开机。 2.开机时,请输入iinux dd,然后按下[enter]键。 3.当系统询问您要透过磁碟片安装时,请按下[tab]键来选择yes,然后按下[enter]键继续。 4.当询问您来源的驱动程式磁碟片安装位置时,请按下[tab]键来选择fdo。接著再按[...

by jerryswxs - Linux文档专区 - 2009-09-13 22:39:29 阅读(778) 回复(0)

此前在装fc6的时候曾在RTL8168B上捣弄了半天,后来就转用了ubuntu,现在又装上了suse 10 问题又出现了,呵呵,是10.1的问题吧,好像现在fc7已经支持了RTL8111B/RTL8168B 解决办法: 1、到 realtek官网 下载对应驱动 //查看linux内核版本:uname -r 2、解压安装 0)注:r8168-8.aaa.bb为你所下载的驱动对应的名字 1)cd到网卡驱动所在文件夹,解压 : # tar vjxf r8168-8.aaa.bb.tar.bz2 //关于解压命令查看《 Lin...

by leanderlee - Linux文档专区 - 2009-09-09 11:02:30 阅读(799) 回复(0)