mount 未知的文件系统 usbfs
我用umount －f卸载文件系统后，再用mount加载时一直报错文件系统已经被加载上了： /dev/vx/dsk/dg1/lv1 is already mounted, /testdir/fs1 is busy,allowable number of mount points exceeded， 实际我用df和mount都看不到fs1，不知道在哪里还纪录着文件系统信息，谢谢！
by fenglimian - Solaris - 2007-09-11 12:06:54 阅读（1923） 回复（1）
信息如下: # mount /dev/idslv /mnt mount: 0506-322 Cannot determine log device to use for /dev/idslv (/mnt). # mount -olog=/dev/loglv00 /dev/idslv /mnt mount: 0506-324 Cannot mount /dev/idslv on /mnt: There is an input or output err or. #
gfs_mkfs -p lock_gulm -t Cluster_1:gfs1 -j 8 /dev/pool/pool1 This will destroy any data on /dev/pool/pool1. Are you sure you want to proceed? [y/n] y Device: /dev/pool/pool1 Blocksize: 4096 Filesystem Size: 1386364 Journals: 8 Resource Groups: 22 Locking Protocol: lock_gulm Lock Table: Cluster_1:gfs1 ...
# mount /home3 提示：~ is corrupted. needs checking #fsck /home3 :log replay in progress a full file system check is required. 请问怎么办哦？
fsck说文件系统坏了，查了几次都是FILE SYSTEM IS BAD 现在也无法mount起来了 mount: the state of /dev/dsk/c1t1d0s7 is not okay and it was attempted to be mounted read/write mount: Please run fsck and try again 有啥办法可以把硬盘mount起来，里面数据应该还能复制一点出来啊。。。
AIX 文件系统 无法mount文件系统无法mount。检查lv没有问题。 用smitty jfs smitty jfs2无法看到文件系统定义。 检查/etc/filesystems发现没有该文件系统的定义： /orcarc: dev = /dev/orcdata vfs = jfs2 log = /dev/loglv01 mount = true options = rw account = false 添加如下内容，mount成功。 本文来自...
在mount文件系统是出如下提示 #mount /detailback Replaying log for /dev/lv11. unknown log record type log read failed 1baff74 0516-306 lslv: Unable to find 0 in the Device Configuration Database. logform: getattr failed: The system call does not exist on this system. mount: 0506-324 Cannot mount /dev/lv11 on /detailback: The media is not formatte d or the format is not correct. FSCK时提示如下 #fsc...
P520双机HA链接DS4300 有两个VG,分别是oravg,appvg 现在vg可以加varyon,但是VG上的文件系统不能mount,提示 mount:0506-324 cannot mount /dev/oradatalv on /oradata : the media is not formatted or the format is not correct lspv显示的PVID也正常，就是文件系统上不去。 上面还有重要的数据，求救
Usage: mounting EXT2FS To mount an EXT2FS partition you first need to identify logical device name of the partition. Execute /usr/bin/prtpart without arguments to see the physical device name of your harddisk. It will be of the form: /dev/rdsk/cNdNp0. This will also display information about the entire partition table. Note: For more info on prtpart execute prtpart -help Now execute: /usr/bin/p...
