ChinaUnix.net
相关文章推荐:

centos6 ntfs分区

使用方法:  1、安装ntfs-3g:   # cd /usr/ports/sysutils/fusefs-ntfs   # make install clean   2、加入fuse加载:   # ee /etc/rc.conf   加入以下这一行:   fusefs_enable="YES"   保存退出   # ee /boot/loader.conf   加入以下这一行:   fuse_load="YES"   保存退出。   注意:这两行一个是fusefs,一个是fuse,千万小心!   # shutdown -r now   3、挂载ntfs分区:   我使用的是USB的移...

by zbhdpx - BSD文档中心 - 2008-11-17 14:15:31 阅读(1807) 回复(0)

相关讨论

root@0[peigen]# mount -t ntfs -o username=administrator,password=xianren //192.168.104.20/WebServer /mnt/bw mount: special device //192.168.104.20/WebServer does not exist 怎么回事

by peigen - 网络与硬件 - 2005-12-06 09:51:25 阅读(768) 回复(0)

本子做了双系统.部分代码备份到了windows下. 想mount ntfs分区.但是不会 请大家帮忙

by mq110 - 系统管理 - 2005-07-12 16:18:22 阅读(1167) 回复(7)

redhat7.2我把kernel的fs ntfs编译成模块形式在/lib/modules/2.4.10/fs/ntfs/生成了文件ntfs.o,但安装时却报什么不能解释的符号的提示,请教各位是怎么回事啊

by piiixeon - 系统管理 - 2004-01-04 13:18:25 阅读(1122) 回复(8)

那位知道请教教我好吗?期待ING。。。

by 纳兰婷 - 服务器及硬件技术 - 2011-12-06 15:08:48 阅读(28424) 回复(94)

用make menuconfig可以看到,REDHAT支持ntfs,但没编译到内核里 我选定后,保存配置文件,我应如何编译内核? 除了make dep,还应怎么做?

by platinum - 系统管理 - 2003-05-05 11:36:01 阅读(914) 回复(6)

请问hde如下结构, 如果安全地将hde5分区转换成ext2(3)分区?(/dev/hde6有大量重要资料, debian sarge) 我曾经试过就这样mkfs.ext2(3) /dev/hde5, 但改变不了, 过后还是一样. Device Boot Start End Blocks Id System /dev/hde1 * 14 2435 19454715 c W95 FAT32 (LBA) /dev/hde2 2436 20023 141275610 f W95 Ext'd (LBA) /dev/hde5 2436 ...

by fivebull - 系统管理 - 2006-04-10 11:25:30 阅读(1769) 回复(8)

Mount ntfs / Ext2 / Ext3 / FAT 16 / FAT 32 in Solaris I often get queries about mounting ntfs / Ext2 / Ext3 / FAT 16 / FAT 32 partions in Solaris . Follow the below steps . Note that its only read-only support for ntfs / Ext2 / Ext3 . * Download packages FSWpart FSWfsmisc Note these are packages for x86 Solaris . * unzip the packages and install it r...

by xmumulin - Solaris文档中心 - 2008-03-18 17:31:25 阅读(1020) 回复(0)

SuSE 中挂接ntfs分区 ,怎么挂接不上呢? mount -t ntfs -o isocharset=cp936 /dev/hda6 /mnt/ntfs 提示:special device /dev/hda6 doesnot exist. 请问是怎么回事呢?

by zhjiun - 桌面与办公 - 2006-12-28 17:36:05 阅读(723) 回复(4)

WIN XP PRE + FEDORA 3 加了ntfs的rpm后 用root mkdir /root/d 再 mount -t nfts /dev/hda5 /root/d 在fedora下可以读windows的d:盘,但写不了,应用程序存盘文件到d:盘也不行 ls -al rw------- root root ............... 如何解决?谢谢!

by shexiaoyu - 系统管理 - 2006-07-10 09:50:24 阅读(797) 回复(4)

我的内核是 2.6.0 重新编译过把ntfs的支持加了进去.终于可以挂载ntfs分区.写权限也编译进去了 ,但是拷入文件时提示没有写权限..我是以root登录的 到底怎么回事呢???我该怎么作 ??????谢谢 !!!!!!!!!!!!!!!!!!1 [ 本帖最后由 seskissinger 于 2006-5-7 14:59 编辑 ]

by seskissinger - 系统管理 - 2006-05-08 19:25:14 阅读(682) 回复(3)