ChinaUnix.net
相关文章推荐:

no subnet declaration for start no IPV4 address

ipv4 TCP/IP subnet Table While subnetting might be easy enough to grasp as a concept, it can be a bit involved, and even mind-boggling in part due to the required manipulations of binary numbers. Many people understand the ideas behind subnetting, but find it hard to follow the actual steps required to subnet a network. The table bellow is intended as a quick reference and a fairly complete examp...

by s4u2003 - 网络技术文档中心 - 2007-05-24 22:24:17 阅读(726) 回复(0)

相关讨论

我在安装FreeBSD5.4的时候,到了设置IP时出错-我设置的gateway为10.47.108.1,IP为10.47.108.22 出错提示信息: Invalid gateway ipv4 address specified

by sanxia - BSD - 2010-08-30 10:05:00 阅读(4434) 回复(5)

服务器意外断电关闭后,重新启动后,apache不能启动,出现httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName,我修改了httpd.conf里面的ServerName,执行/usr/local/etc/rc.d/apache.sh start,出现了apache start,但是httpd根本没有起来。 我接着查httpd-error.log,有下面的记录 (EAI 7)No address associated with hostname: mod_unique_id: unable to find ipv4 address...

by whd100 - 服务器应用 - 2008-03-17 16:12:47 阅读(8530) 回复(3)

在看网络处理器,其中提到ipv4 Forwarder ,是不是就是ip包在np中的流入流过程啊,从哪个模块进来从哪个模块出去啊?

by zw2002 - 数据安全 - 2007-03-01 16:03:11 阅读(1319) 回复(0)

在看网络处理器,其中提到ipv4 Forwarder ,是不是就是ip包在np中的流入流过程啊,从哪个模块进来从哪个模块出去啊?

by zw2002 - 攻防交流区 - 2007-03-01 16:03:11 阅读(3103) 回复(0)

Ubuntu 设置ipv4 主要是编辑/etc/network/interfaces和/etc/resolv.conf这两个文件,前者设置了ip地址、网关、子网掩码,后者设置dns等属性 示例(参考http://linux.chinaunix.net/techdoc/net/2008/04/05/989425.shtml): 1. 以DHCP方式配置网卡 编辑文件/etc/network/interfaces: sudo vi /etc/network/interfaces 并用下面的行来替换有关eth0的行: # The primary network interface - use DHCP to find ...

运维

by cu_Cbear - 监控及自动化运维技术 - 2011-12-21 21:45:11 阅读(2129) 回复(1)

本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u3/106442/showart_2100404.html

网络技术

by 八度空间工作室 - 网络技术文档中心 - 2009-11-22 18:22:04 阅读(1100) 回复(0)

目前负责 ipv4的大区 whois.arin.net 美洲区 北美 whois.apnic.net 亚太区 包括亚洲和澳大利亚 whois.ripe.net 欧洲区 欧洲/中东(西亚)/北非 whois.lacnic.net 拉美区 拉丁美洲和加勒比海区域 非洲网络的IP查询也在whois.arin.net 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/28158/showart_261522.html

by liuake - 网络技术文档中心 - 2007-03-19 21:16:15 阅读(959) 回复(0)

重启报错误 [root@HomeNAT etc]# dhcpd start Internet Systems Consortium DHCP Server V3.0.1rc14 Copyright 2004 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 0 leases to leases file. No subnet declaration for start (0.0.0.0). ** Ignoring requests on s...

by wualing - 服务器架设 - 2007-01-09 00:58:07 阅读(2380) 回复(1)

重启报错误 [root@HomeNAT etc]# dhcpd start Internet Systems Consortium DHCP Server V3.0.1rc14 Copyright 2004 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 0 leases to leases file. No subnet declaration for start (0.0.0.0). ** Ignoring requests on s...

by wualing - 服务器应用 - 2007-01-09 00:58:07 阅读(3335) 回复(1)

ipv4: 32位ip地址 20字节的包头 最大65535-20的包体 (包长字段包含包头部分) ipv6: 128位ip地址 40字节的包头 最大65535的包体(包长字段不包含包头部分) ipv4 mms最大传输应用数据 65535-40 ipv6 mms最大传输应用数据 65535-20 ipv6 当对端传来的syn中的mss等于65535时,说明使用了特大净荷选项,此时socket按照本地的mtu-40-20发送给对端,如果此值太大,会使用mtu发现功能确定较小的值。 本文来自ChinaUnix博客...

by HJLin - Linux文档专区 - 2008-04-21 14:55:36 阅读(840) 回复(0)