各位现在我出现这么一个问题，在进入linux的时候不能正常登陆xwindows 。报错的具体信息是： your session only lasted less than 10 seconds 。If you have not logged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. Try logging in with one of the failsafe sesions to see if you can fix this problem. ". The .xession-errors contain no errors, just ...

Those who understand binary and those who don't:luya:

CHECK_NRPE: Socket timeout after 10 seconds.求解———— 我在nrpe.conf 里配置了 tcommand_timeout=60 而 command.cfg里也加入了 -t 60 可还是报CHECK_NRPE: Socket timeout after 10 seconds这个错， 这是为什么，是不是系统还要做什么优化， 强烈求解

nagios监控过程中发现CHECK_NRPE: Socket timeout after 10 seconds.这即便把时间改成３０s也还是一样的报错，而且很有规律，就是需要nagios用户通过sudo去执行的监控脚本才报这样的错误

OpenBSD - For your Eyes only by Robert Storey Introduction Not a week goes by without a new computer security bulletin being issued. Most of the big publicity is given to Windows viruses, worms and Trojans, but take a peek under the sheets and you'll find that open source software is not immune to security compromises. The problem is particularly acute on servers, and diligent system administrat...

今天刚刚看到的文章感觉简单实用.如果是大家都能够注意这些事情.那么sa就少去了很多事情. virus protection and security checklist 10 Steps to Help Keep your Business Secure your employees can quickly get the latest updates for their computer's operating system, software, and hardware on the Windows Update site. Windows Update scans the computer and provides a selection of appropriate updates. Virus p...

大家好，我的机器型号是：rp3410。我现在想修改密码，但是重启之后一直到出现登陆窗口，我都没有看到“To discontinue, press any key in 10 seconds”的提示信息，请高手指点。谢谢

大家好，我的机器型号是：rp3410。我现在想修改密码，但是重启之后一直到出现登陆窗口，我都没有看到“To discontinue, press any key in 10 seconds”的提示信息，请高手指点。谢谢

"WRITE_10" command timed out 182 seconds after its start on ha=0 服务器运行过程中随机报WARNING: "WRITE_10" command timed out 182 seconds after its start on ha=0 id=1 lun=0 Request=C1465B80， 请教是什么原因造成的，如何解决？