Ubuntu 求助 系统网卡不定时自动重启

jasonvsky

回复 8# cu_shell


    谢谢  兄弟

dengbao2001

问题解决了吗？

jasonvsky

回复 12# dengbao2001


    没有呢,谢谢,周末又重启了,能不能帮我看看日志,有什么建议没

65535 RES=0x00 SYN URGP=0
Nov 15 20:16:19 simope-0A kernel: [185588.843340] ------------[ cut here ]------------
Nov 15 20:16:19 simope-0A kernel: [185588.843354] WARNING: at /build/buildd/linux-3.2.0/net/sched/sch_generic.c:255 dev_watchdog+0x25a/0x270()
Nov 15 20:16:19 simope-0A kernel: [185588.843358] Hardware name: System x3650 M4 -[7915I01]-
Nov 15 20:16:19 simope-0A kernel: [185588.843361] NETDEV WATCHDOG: eth2 (igb): transmit queue 2 timed out
Nov 15 20:16:19 simope-0A kernel: [185588.843364] Modules linked in: usbhid hid rfcomm bnep bluetooth parport_pc ppdev nls_iso8859_1 nls_cp437 vfat fat ip6t_LOG xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECT ipt_LOG xt_multiport xt_limit xt_tcpudp xt_addrtype xt_state ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables sb_edac edac_core cdc_ether usbnet tpm_tis mac_hid shpchp ioatdma lp parport igb dca megaraid_sas
Nov 15 20:16:19 simope-0A kernel: [185588.843423] Pid: 0, comm: swapper/0 Not tainted 3.2.0-60-generic #91-Ubuntu
Nov 15 20:16:19 simope-0A kernel: [185588.843427] Call Trace:
Nov 15 20:16:19 simope-0A kernel: [185588.843429]  <IRQ>  [<ffffffff810683af>] warn_slowpath_common+0x7f/0xc0
Nov 15 20:16:19 simope-0A kernel: [185588.843445]  [<ffffffff8104f634>] ? __enqueue_entity+0x74/0x80
Nov 15 20:16:19 simope-0A kernel: [185588.843451]  [<ffffffff810684a6>] warn_slowpath_fmt+0x46/0x50
Nov 15 20:16:19 simope-0A kernel: [185588.843457]  [<ffffffff810251a2>] ? x86_pmu_enable+0x1f2/0x270
Nov 15 20:16:19 simope-0A kernel: [185588.843465]  [<ffffffff8156675a>] dev_watchdog+0x25a/0x270
Nov 15 20:16:19 simope-0A kernel: [185588.843472]  [<ffffffff81112e30>] ? perf_rotate_context+0x110/0x220
Nov 15 20:16:19 simope-0A kernel: [185588.843477]  [<ffffffff81566500>] ? qdisc_reset+0x50/0x50
Nov 15 20:16:19 simope-0A kernel: [185588.843483]  [<ffffffff81566500>] ? qdisc_reset+0x50/0x50
Nov 15 20:16:19 simope-0A kernel: [185588.843490]  [<ffffffff810773b6>] call_timer_fn+0x46/0x160
Nov 15 20:16:19 simope-0A kernel: [185588.843495]  [<ffffffff81566500>] ? qdisc_reset+0x50/0x50
Nov 15 20:16:19 simope-0A kernel: [185588.843502]  [<ffffffff81078d02>] run_timer_softirq+0x132/0x2a0
Nov 15 20:16:19 simope-0A kernel: [185588.843510]  [<ffffffff810965c5>] ? ktime_get+0x65/0xe0
Nov 15 20:16:19 simope-0A kernel: [185588.843515]  [<ffffffff8106fc48>] __do_softirq+0xa8/0x210
Nov 15 20:16:19 simope-0A kernel: [185588.843521]  [<ffffffff8109d584>] ? tick_program_event+0x24/0x30
Nov 15 20:16:19 simope-0A kernel: [185588.843529]  [<ffffffff8166c56c>] call_softirq+0x1c/0x30
Nov 15 20:16:19 simope-0A kernel: [185588.843536]  [<ffffffff810162f5>] do_softirq+0x65/0xa0
Nov 15 20:16:19 simope-0A kernel: [185588.843541]  [<ffffffff8107002e>] irq_exit+0x8e/0xb0
Nov 15 20:16:19 simope-0A kernel: [185588.843546]  [<ffffffff8166cf1e>] smp_apic_timer_interrupt+0x6e/0x99
Nov 15 20:16:19 simope-0A kernel: [185588.843552]  [<ffffffff8166adde>] apic_timer_interrupt+0x6e/0x80
Nov 15 20:16:19 simope-0A kernel: [185588.843555]  <EOI>  [<ffffffff8137035d>] ? intel_idle+0xed/0x150
Nov 15 20:16:19 simope-0A kernel: [185588.843567]  [<ffffffff8137033f>] ? intel_idle+0xcf/0x150
Nov 15 20:16:19 simope-0A kernel: [185588.843574]  [<ffffffff8150c5e1>] cpuidle_idle_call+0xc1/0x290
Nov 15 20:16:19 simope-0A kernel: [185588.843580]  [<ffffffff8101322a>] cpu_idle+0xca/0x120
Nov 15 20:16:19 simope-0A kernel: [185588.843585]  [<ffffffff816286ce>] rest_init+0x72/0x74
Nov 15 20:16:19 simope-0A kernel: [185588.843592]  [<ffffffff81cfcc06>] start_kernel+0x3b5/0x3c2
Nov 15 20:16:19 simope-0A kernel: [185588.843599]  [<ffffffff81cfc388>] x86_64_start_reservations+0x132/0x136
Nov 15 20:16:19 simope-0A kernel: [185588.843605]  [<ffffffff81cfc140>] ? early_idt_handlers+0x140/0x140
Nov 15 20:16:19 simope-0A kernel: [185588.843611]  [<ffffffff81cfc459>] x86_64_start_kernel+0xcd/0xdc
Nov 15 20:16:19 simope-0A kernel: [185588.843615] ---[ end trace 36c68b9e2673872e ]---
Nov 15 20:16:19 simope-0A kernel: [185588.843652] igb 0000:06:00.2: eth2: Reset adapter
Nov 15 20:16:19 simope-0A kernel: [185588.875338] igb 0000:06:00.1: eth1: Reset adapter
Nov 15 20:16:21 simope-0A kernel: [185590.625261] igb: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
Nov 15 20:16:23 simope-0A kernel: [185592.828944] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Nov 15 20:16:29 simope-0A kernel: [185599.429109] [UFW BLOCK] IN=eth2 OUT= MAC=6c:ae:8b:21:52:0c:00:0c:ce:02:1c:00:08:00 SRC=183.61.245.08 DST=220.221.114.09 LEN=40 TOS=0x00 PREC=0x00 TTL=107 ID=256 PROTO=TCP SPT=6000 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0

super皮波

你这个服务器是干嘛用的，能不能跟你这里的配置有关？

Nov 15 20:16:21 simope-0A kernel: [185590.625261] igb: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX  百兆全双工，接收有流控
Nov 15 20:16:23 simope-0A kernel: [185592.828944] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX     千兆全双工，收发都有流控

super皮波

eth2 (igb): transmit queue 2 timed out
感觉像是主动的重启

super皮波

我不太懂，一块学习学习

chenyx

会不会是网卡驱动的问题啊?

流氓无产者

jasonvsky 发表于 2014-11-17 16:30
回复 12# dengbao2001

貌似网卡中断处理有问题，可能和流量有关系，找新版本，或者替换新igb驱动看一下

jasonvsky

回复 14# super皮波



数据库服务器,

以前数据库和应用服务 同个机柜,使用外网ip连接, 100M网卡,现在改为使用内网ip连接使用1000M网卡接口

而且同个机柜还有几台其它应用, 都是接一个交换器上, 流量也蛮大的,估计也影响到上面服务器了,  先观察先


   

jasonvsky

回复 18# 流氓无产者


    谢谢建议