Solaris 10安装命令sys-uncofig用法介绍

sdccf

出处:51CTO.com　

阅读提示：本文介绍Solaris 10操作系统的安装配置命令工具sys-unconfig的用法和步骤。
以root用户登录solaris后，在命令行提示符下输入
    # sys-unconfig
回车，屏幕上出现如下提示
WARNING
This program will unconfigure your system.  It will cause it
to revert to a "blank" system - it will not have a name or know
about other systems or networks.
This program will also halt the system.
Do you want to continue (y/n) ?
输入y，系统将重启。
重新启动Solaris后，将提示对系统重新进行设 置，包括缺省语言、X Server、网络、时间等的设置。
(1) 语言选择。选择1，简体中文。回车，进入下一步
Select a Language
0.English
1.Simplified Chinese
Please make a choice (0 - 1),or press h or ? for help:
(2) 字符集选择。选择2。回车，进入下一步
Select a Locale
0.Simplified Chinese EUC
1.Simplified Chinese EUC
2.Simplified Chinese GB18030
3.Simplified Chinese GBK
4.Simplified Chinese GBK
5.Simplified Chinese UFT-8
6.Simplified Chinese UFT-8
7.Go Back to Previous Screen
Please make a choice (0 - 7),or press h or ? for help:
(3) X Server选择。通过上下键将光标移到Xorg server，回车选中。F2，进入下一步
kdmconfig - Introduction and X Server Selection
X Server Selection
----------------------
[X] Xorg server
[ ] Xsun server
F2_Continue         F3_Exit          F6_Help
(4) 网卡设置。系统自动找到网卡。以下步骤中，网卡名以****代表。回车，进入下一步
Configuring network interface addresses: ****   (回车)
ipw0       (回车)
(4.1) 网络连接设置。选择Yes。F2，进入下一步
Network Connectivity
Networked
-----------
[X] Yes
[ ] No
F2_Continue         F6_Help
(4.2) 如果有多块网卡，进行网卡选择。F2，进入下一步
Configure Multiple Network Interfaces
Network interfaces
--------------------
[X] iprb0
[ ] ipw0
F2_Continue         F6_Help
(4.3) 是否使用DHCP。选择No，进入下一步
DHCP for ****
Use DHCP for ****
-----------
[ ] Yes
[X] No
F2_Continue         F6_Help
(4.4) 设置网卡的主机名。输入自定义的主机名。F2，进入下一步
Host Name for ****
Host name for **** __________________
F2_Continue         F6_Help
(4.5) 设置IP地址。输入IP地址。F2，进入下一步
IP Address for ****
IP Address for **** __________________
F2_Continue         F6_Help
(4.6) 设置子网。选择Yes。F2，进入下一步
Subnet for ****
System part of a subnet
-----------
[X] Yes
[ ] No
F2_Continue         F6_Help
(4.7) 子网掩码设置。输入子网掩码，缺省255.255.255.0。F2，进入下一步
Netmask for ****
Netmask for **** __________________
F2_Continue         F6_Help
(4.8) 是否支持IPv6。缺省No。F2，进入下一步
IPv6 for ****
Enable IPv6 for ****
-----------
[ ] Yes
[X] No
F2_Continue         F6_Help
(5) 对以上设置进行确认。F2，进入下一步；F4对前面的设置进行修改
Confirm Information for ****
F2_Continue         F4_Change            F6_Help
Configuring parameters , 25 seconds left to complete
(6) Kerberos安全设置。缺省No。F2，进入下一步
Configure Security Policy:
Specify Yes if the system will use the Kerberos security mechanism.
Specify No if this system will use standard UNIX security
Configure Kerberos Security
--------------------------------
[ ] Yes
[X] No
Confirm Information
F2_Continue         F4_Change            F6_Help
(7) 名字服务。选择None。F2，进入下一步
Name Service
Name service
----------------
[ ] NIS+
[ ] NIS
[ ] DNS
[ ] LDAP
[X] None
F2_Continue         F6_Help
(8) 名字服务确认。F2，进入下一步
Confirm Information
F2_Continue         F4_Change            F6_Help
(9) 时区选择。选择Asia，进入下一步
Time Zone
Continents and Oceans
[ ] Africa
[ ] Americas
[ ] Antarctica
[ ] Arctic Ocean
[X] Asia
[ ] Atlantic Ocean
[ ] Australia
[ ] Europe
[ ] Indian Ocean
[ ] Pacific Ocean
[ ] other - offset from GMT
[ ] other - specify time zone file
(10) 国家和地区选择。选择China，进入下一步
Country or Gegion
Countries and Regions
[ ] Afghanistan
[ ] Amenia
[ ] ......
[ ] Arctic
[X] China
[ ] ......
[ ]
(11) 日期时间设置。F2，进入下一步
Date and Time
> Accept the default date and time or enter new values.
Date and time : 2006-02-15 15:38
Year (4 digits) : 2006
Month    (1-12) : 02
Day (1-31) : 15
Hour       (0-23) : 15
Minute    (0-59) : 38
(12) 时区和时间确认。F2，进入下一步
Confirm Information
......
F2_Continue         F4_Change            F6_Help
(13) 设置root密码。输入密码。或直接F2，进入下一步
Root Password: ________________
Root Password: ________________
F2_Continue         F6_Help
(14) 设置完成。问是否覆盖缺省的NFS域名。缺省no。回车，自动重启
System identification is completed.
Do you need to override the system's default NFS version 4 domain name (yes/no) ? [no] : __
rebooting system due to change  the file /etc/init


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/31/showart_600544.html