天阔PC服务器SCO OpenServer 5安装说明MYLEX170 RAID

sdccf

作者：  出处：Unix爱好者家园unix-cd.com  更新时间： 2005年10月09日
天阔PC服务器 SCO UNIX OpenServer 5.0.5 安装说明-配有MYLEX170 RAID卡  
1.更改IDE-CDROM 设置，将CDROM 跳线设为 MASTER，将CDROM IDE线接到IDE 1 口。从光驱启动系统出现Boot提示符时:
boot：后输入：defbootstr ahslink=mdac Sdsk=mdac(0,0,0,1) disable=slha ,系统会提示安装mdac依次插入RAID卡自带OpenServer的驱动盘依次加载完成后再次提示插入BOOT盘，插入该软盘回车。
当系统出现""a" if you want to use character major 6 [default]"时， 选 "a" 回车。 继续安装直到完成。
网卡配置：
1. Copy the eee.vol file to any directory, say /tmp, on the SCO system,renaming the file as VOL.000.000. Also, make the file read-only by using 'chmod'.for example, # cp eee.vol /tmp/VOL.000.000
# chmod 444 /tmp/VOL.000.000
2. If there is an older version of the eeE driver on the system, you must first remove it. To do this, run 'netconfig'. Remove all instances of the "Intel ..." adapters. Exit netconfig without opting to relink the kernel.
3. Install the new driver using 'custom'. When asked for the installation media, choose 'media images', and type the directory path to the VOL.000.000 file. (In step 1, if if you copied it to /tmp, type '/tmp'). After the installation of the driver is complete, exit 'custom'.
4. Run 'netconfig' and add the adapters. For each adapter that is present in the system, enter the appropriate TCP/IP parameters. By default, the driver automatically detects the line speed and duplex mode. If you want to force any of these settings, choose 'Advanced Options' and set the speed and duplex modes. Exit 'netconfig' and choose to relink the kernel.
.
5. Reboot the system.
mouse 设置：
#mkdev mouse
选择PS/2 -Style Keyboard mouse 重新链接核心，重起系统。


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/31/showart_509559.html