能不能从ALOM直接设置系统以单用户模式启动?

congli

机器Sun Fire V440, 由于这前设置过NIS, 昨晚更改过IP之后, 系统运行到NIS就停止了, IP能Ping通,但SSH,Telnet都不能登录.

Rebooting with command: boot
Boot device: disk  File and args:
SunOS Release 5.9 Version Generic_118558-11 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
Hardware watchdog enabled
configuring IPv4 interfaces: ce0.
Hostname: solaris
The system is coming up.  Please wait.
checking ufs filesystems
/dev/md/rdsk/d40: is logging.
/dev/md/rdsk/d30: is logging.
NIS domain name is XXXX
starting rpc services: rpcbind keyserv ypserv ypbind ypxfrd rpc.yppasswdd rpc.y.
WARNING: Timed out waiting for NIS to come up

输入#.进入ALOM, 原以为break可以进入ok状态,但

sc> break
Are you sure you want to send a break to the system [y/n]? y
sc> console

就没反应了,而未能出现ok提示符.

brucewoo

stop-a或ctrl-break
有什么反应.

congli

Ctrl-Break也没有反应.

congli

终于可以进入到ok状态了:
sc> poweroff
sc> bootmode bootscript="setenv auto-boot? false"
sc> poweron

easybegin

好像没有可以设置成直接进单用户的功能

congli

原帖由 easybegin 于 2009-6-7 12:19 发表
好像没有可以设置成直接进单用户的功能

刚测试过,
bootmode bootscript="setenv boot-command boot -s"是可以直接进入单用户.当然auto-boot?为True.

yoyosys

学习了

easybegin

哈，用脚本啊，学习一下

风之幻想

收藏了。