- 论坛徽章:
- 0
|
回复 #16 ziggler 的帖子
终于搞定了,参看:
I didn't get to try to install BT2 on my USB, I got it working before.
When following the guide from pendrivelinux com I downloaded the newest version of syslinux ver. 3.60 from kernel org/pub/linux/utils/boot/syslinux/
So I tried updating the syslinux files from BT3b to the newest version, and behold! BT3b boots from both my USB flash drives.
So the developers should be noted to update the syslinux in the next release of BT3. And ppl with problems getting their USB drive to boot should try updating it manually by replacing these three files:
boot/syslinux/syslinux
boot/syslinux/syslinux.exe
boot/syslinux/syslinux.com
Also it should be noted that to save the changes I had to point to a file (like dev/sdb2/changes.dat) and not just to dev/sdb2/
不过在HP的机器上可以USB启动,但是在IBM的机器上却启动不了,相同的USB启动盘;需要继续研究;
昨天晚上:
有一个信号很好的无线信号,用BT3破译了密码,但是连接时提示“windows无法连接到选定网络 网络可能不在区域中。不知道是何原因?
http://www.wlanbbs.com/thread-22720-1-1.html 这里也是遇到了相同的问题;
在首选网络项目下面添加这个网络,输入SSID,验证选择共享式,手动输入密码,应该就可以了!不知道这样是否可行,晚上再试验一下。
http://www.ccw.com.cn/oa/xp/htm2008/20080905_496939.shtml
[ 本帖最后由 ziggler 于 2009-8-4 09:25 编辑 ] |
|