- 论坛徽章:
- 0
|
按照 sdccf 大大提供的ftp://ftpput.caldera.com/tmp/sup ... -CD-IBM-aacraid.iso刻了aacraid光盘.
再按照 answer 版主的《OSR507光盘启动安装文档(不使用软驱或USB软驱),对一些新的服务器比较有用》这篇文章尝试安装一台IBM System x3650服务器。但找不到“July 2005 OSR507 CD安装盘”,手中只有04年下载的“OpenServer_507_EN_CDROM.iso”刻成的光盘.
安装步骤严格按照answer的步骤,只是把HP的驱动名改成了IBM的:
1- 使用制作好的osr507boot-CD-IBM-aacraid光盘启动,输入引导字符串
Now add the following install boot string
boot
: defbootstr link=fd(64)aacraid
当提示插入aacraid驱动盘时,回车继续安装
2- 当系统安装蓝色界面出现后,取出osr507boot-CD-IBM-aacraid光盘,插入OpenServer_507_EN_CDROM安装盘
输入正确序列号,依提示输入必要信息
当信息配置结束时,见下文
The BTLD package will now be extracted
mount: Bad address
Please select the floppy device you are using
(1) /dev/fd0
(2) /dev/fd1
choose option (2) and you will be asked to insert the
lsil BTLD floppy disk again: 这里需要选择2
Please insert the floppy for BTLD package: lsil
and press <Return>:
执行 RETURN 系统会有如下信息:
mount: Bad address, Could not mount the BTLD floppy
You may:
(a) try again
(b) abort BTLD load, but continue installation
(c) abort the installation
Respond with one of (a,b,c):
choose option "b". 这里选择b
直到系统安装完毕
3- 插入osr507boot-CD-IBM-aacraid光盘引导系统到boot提示符下,敲入引导字符:
At the Boot prompt, enter either one of the following boot string:
boot
: defbootstr link=fd(64)aacraid root=hd(42) Srom=wd(0,0,0,0)
系统引导后,进入单用户状态:
(注意:系统一定要进入单用户状态操作,也就是在Ctrl+D选项时,直接输入root用户口令)
执行以下操作安装aacraid 驱动到系统中
Mount the BTLD Boot CD and install the "aacraid" BTLD:
# mount /dev/cd0 /mnt
此时问题出现了:
提示如下:
WARNING: wd(0) now using polled interface
Unexpected trap in kernel mode:
......(省略)
PANIC: k_trap - kernel mode tarp type 0x0000000E
debug0:1>
进入死机状态,只能关电源。试了多次故障依旧。
有哪位高手能帮我? |
|