头疼：linux网络连接断开（ssh telnet ping或者访问web服务）

mayongchao

一台linux机器 ，不论是telnet  还是ssh，登陆上去后，还是上边启动一个网络服务（比如web服务）， 我从其他的机器上去ping它或者登录或者连web服务。只要一连， 这个登录的连接立刻断掉。
这是系统还在运行，也能ping痛， 就是不能登录，也不封访问web服务。再去ssh 或者telnet 告诉我：ssh: connect to host wg2 port 22: Connection refused。
过一段时间后又能再次登录。



以下是ssh debug的日志。
[root@wg1 ~]# ssh -vv wg2
OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to wg2 [192.168.88.30] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.9p1
debug1: match: OpenSSH_3.9p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.9p1
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 133/256
debug2: bits set: 502/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'wg2' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:4
debug2: bits set: 513/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/identity ((nil))
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa ((nil))
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: gssapi-with-mic
debug2: we sent a gssapi-with-mic packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug2: we sent a gssapi-with-mic packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug2: we did not send a packet, disable method
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug1: Trying private key: /root/.ssh/id_rsa
debug1: Trying private key: /root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
root@wg2's password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Fri Nov 28 17:17:41 2008 from wgdb
[root@wg2 ~]#
[root@wg2 ~]#
[root@wg2 ~]#
[root@wg2 ~]# ls
anaconda-ks.cfg  Desktop  install.log  install.log.syslog  telnet-server-0.17-26.i386.rpm
[root@wg2 ~]# debug1: channel 0: free: client-session, nchannels 1
Read from remote host wg2: Connection reset by peer
Connection to wg2 closed.
debug1: Transferred: stdin 0, stdout 0, stderr 80 bytes in 114.1 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.7
debug1: Exit status -1
[root@wg1 ~]# ssh wg2
ssh: connect to host wg2 port 22: Connection refused
[root@wg1 ~]# uname -a
Linux wg1 2.6.9-67.ELsmp #1 SMP Wed Nov 7 13:56:44 EST 2007 x86_64 x86_64 x86_64 GNU/Linux



望高人指点！

kns1024wh

1、你的iptables的规则是否有限制；
2、你的openssh的配置文件
3、你的网络设置的问题
将openssh的配额制文件仔细检查；

emmoblin

肯定是那个异常断开的登录没有释放22端口，所以不能再次连接了。
很有可能是ssh有问题。
这个问题不好查，不像是配置的问题，建议从装一下ssh－server试试

mayongchao

应该不是ssh 的问题。，
不论telnet  ssh 还是http 只要我去ping一下，或者从其他地方那个再登录一下 就：

[root@wg2 etc]# Read from remote host wg2: Connection reset by peer
Connection to wg2 closed.

amage

我的问题啊 谁告诉我啊

marsaber

以前遇到过一次：cat /var/log/messages（很大）时，连接断开！
原因：网卡问题！换块网卡就好了。