- 论坛徽章:
- 13
|
本帖最后由 ulovko 于 2012-07-28 10:31 编辑
muwanqing_cu 发表于 2012-05-02 01:14 ![]()
总结:Ports里的foo2zjs没有p1007驱动(可能是版本太老了???) 需要用户到foo2zjs网站上自己下载源码 ...
感谢分享 ^_^ 赞!
- ko# cd /usr/ports && make quicksearch key=foo2zjs
- Port: foo2zjs-20110609_2
- Path: /usr/ports/print/foo2zjs
- Info: Driver for printers that use the ZjStream wire protocol
- ko# cat pkg-descr
- foo2zjs is an open source printer driver for printers that use the Zenographics
- ZjStream wire protocol for their print data, such as the Minolta/QMS magicolor
- 2300 DL or Konica Minolta magicolor 2430 DL. These printers are often
- erroneously referred to as winprinters or GDI printers.
- However, Microsoft GDI only mandates the API between an application and the
- printer driver, not the protocol on the wire between the printer driver and the
- printer. In fact, ZjStream printers are raster printers which happen to use a
- very efficient wire protocol which was developed by Zenographics and licensed
- by most major printer manufacturers for at least some of their product lines.
- ZjStream is just one of many wire protocols that are in use today, such as
- Postscript, PCL, Epson, etc.
- WWW: http://foo2zjs.rkkda.com/
复制代码 |
|