鼠标如何安装?

snowharw

我用的是scounix5.0.7,安装完后进入图形界面后,鼠标不能用,请问各位大侠,应该如何安装设置,我用的是usb接口的鼠标,带轮的.

saintdragon

进单用户，执行
mkdev hd
配置完后，重新启动计算机。

sdccf

是鼠标啊,不是硬盘.
运行mkdev  mouse配置

xy-coordinate

#mkdev mouse

       Mouse Initialization Program
       1.Display current configuration
       2.Add a mouse to the system
       3.Remove a mouse form the system
       4.Associate a terminal with an existing mouse
       5.disasscoiate a terminal from an existing mouse
       6.Rremove the mouse drivers from the kernel

Select an option or enter q to quit:

The following mouse device type are supported:

       1.Serial mouse
       2.Bus mouse
       3.PS/2-style keyboard mouse (IRQ 12)

Select an option or enter q to return to the prerious menu:3

The following keyboard mouse devices are supported
   
        1.Low Resolution keyboard Mouse
        2.High Resolution Keboard Mouse

Select an option or enter q to return to the top menu:2

Enter a list of terminal (e.g. tty2a multiscreen)or enter q to quit.The default is multiscreen

Press return when finished:

Associating the multiscreens…

Do you want to the High Resolution keyboard Mouse on any other terminal?(y/n)n

You must create a new kernel to effect the drvier change you specified.
Do you wish to create a new kernel now?(y/n)y

The UNIX Operation System will now be rebuilt
This will take a minutes,Please wait.
Root for this system build is /
The UNIX kernel has been rebuilt

Do you want this kernel to boot by default?(y.n)y
Do you want the kernel environment rebuilt?(y/n):y

特别注意需要重启机器

sumendala

4楼说的对。

sony7788

重启机器确实很重要!
不过我鼠标老跑边!没法用!

sdccf

在vmware下就是这样.

snowharw

在VMWARE下,配置完成后,我刚开始能用了一会儿就不行了,跑到边就不行了,请问各位有什么办法没?

melove

vmware本身不直接支持sco的OS，所以没有对应的vmware tools，也就没法驱动vmware的vga，所以图形还是免了吧。