我的CACTI－－FAQ

joecen

原帖由 windychan 于 2006-1-9 09:52 发表
那有钱买多CPU服务器哦

你的cacti监测的点多不多?用cmd.php还是cactid进行数据采集?

ddie

我用的是fedora4 ，编译rrdtool的时候提示2个错误
就是运行make后末尾出现如下错误
../src/config_aux.h:80:2: error: #error "Can't compile without finite function"
../src/config_aux.h:84:2: error: #error "Can't compile without isinf function"
make[3]: *** [RRDs.o] Error 1
make[3]: Leaving directory `/km/cacti/rrdtool-1.0.50/perl-shared'
make[2]: *** [perl_shared] Error 2
make[2]: Leaving directory `/km/cacti/rrdtool-1.0.50'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/km/cacti/rrdtool-1.0.50'
make: *** [all] Error 2
该怎么解决呢？ 大侠帮忙一下呀，谢谢了

ddie

好奇怪哦～
我都重新安装好多次了，还是出现这错误

wlp780727

我小鸟一只
刚对着教程装了个cacti
默认的初始用户名和密码：admin  admin
我改了下成了 *;*

我关了网页再开，输入密码就进不去了

用admin    admin   也不行


请问怎么找回密码或者破解密码啊？

exitgogo

在新建的devices中
SNMP Username (v3)
Fill in the SNMP v3 username for this device.   
SNMP Password (v3)
Fill in the SNMP v3 password for this device. 应该怎么填写呀》谢谢！

joecen

原帖由 exitgogo 于 2006-3-27 14:15 发表
在新建的devices中
SNMP Username (v3)
Fill in the SNMP v3 username for this device.   
SNMP Password (v3)
Fill in the SNMP v3 password for this device. 应该怎么填写呀》谢谢！

确定你使用的snmp版本，如果不是snmpv3即不需要填写snmpv3的部分。

netpat

我安装cacti后，可以监控到cpu/mem等信息，但通过SNMP - Interface Statistics 抓不到网卡流量，请高手指点，谢谢!!

我的系统环境为：
RH4+mysql-4.0.12+rrdtool-1.2.13+cacti-0.8.6h+snmp-5.1.2+apache2+php4.3.x

[root@MysqlSVR snmp]# rpm -qa|grep snmp
net-snmp-devel-5.1.2-11
net-snmp-utils-5.1.2-11
net-snmp-perl-5.1.2-11
net-snmp-libs-5.1.2-11
net-snmp-5.1.2-11
[root@MysqlSVR snmp]# /usr/local/rrdtool/bin/rrdtool --version |head -n 1
RRDtool 1.2.13  Copyright 1997-2006 by Tobias Oetiker <tobi@oetiker.ch>
[root@MysqlSVR snmp]# ls /home/cacti/cacti-0.8.6h.tar.gz
/home/cacti/cacti-0.8.6h.tar.gz

以下是在Data Query下的debug信息：

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/local/cacti/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ Located input field 'ifIndex' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.1'
+ Found item [ifIndex='1'] index: 1 [from value]
+ Found item [ifIndex='2'] index: 2 [from value]
+ Found item [ifIndex='3'] index: 3 [from value]
+ Found item [ifIndex='4'] index: 4 [from value]
+ Located input field 'ifOperStatus' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.8'
+ Found item [ifOperStatus='1'] index: 1 [from value]
+ Found item [ifOperStatus='1'] index: 2 [from value]
+ Found item [ifOperStatus='1'] index: 3 [from value]
+ Found item [ifOperStatus='2'] index: 4 [from value]
+ Located input field 'ifDescr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.2'
+ Found item [ifDescr='lo'] index: 1 [from value]
+ Found item [ifDescr='eth0'] index: 2 [from value]
+ Found item [ifDescr='eth1'] index: 3 [from value]
+ Found item [ifDescr='sit0'] index: 4 [from value]
+ Located input field 'ifName' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.1'
+ Located input field 'ifAlias' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.18'
+ Located input field 'ifType' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.3'
+ Found item [ifType='24'] index: 1 [from value]
+ Found item [ifType='6'] index: 2 [from value]
+ Found item [ifType='6'] index: 3 [from value]
+ Found item [ifType='131'] index: 4 [from value]
+ Located input field 'ifSpeed' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.5'
+ Found item [ifSpeed='10000000'] index: 1 [from value]
+ Found item [ifSpeed='100000000'] index: 2 [from value]
+ Found item [ifSpeed='100000000'] index: 3 [from value]
+ Found item [ifSpeed='0'] index: 4 [from value]
+ Located input field 'ifHwAddr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.6'
+ Found item [ifHwAddr=''] index: 1 [from value]
+ Found item [ifHwAddr='00:0D:56:BB:B7:BC'] index: 2 [from value]
+ Found item [ifHwAddr='00:0D:56:BB:B7:BD'] index: 3 [from value]
+ Found item [ifHwAddr=''] index: 4 [from value]
+ Located input field 'ifIP' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.4.20.1.2'
+ Found item [ifIP='127.0.0.1'] index: 1 [from regexp oid parse]
+ Found item [ifIP='192.168.0.8'] index: 2 [from regexp oid parse]
+ Found item [ifIP='10.10.1.19'] index: 3 [from regexp oid parse]
+ Found data query XML file at '/usr/local/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/local/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/local/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/local/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/local/cacti/resource/snmp_queries/interface.xml'

牙齿晒太阳

06/05/2006 04:32:04 PM - CMDPHP: Poller[0] Host[1] DS[3] WARNING: Result from CMD not valid.  Partial Result:
06/05/2006 04:32:04 PM - CMDPHP: Poller[0] Host[1] DS[4] WARNING: Result from CMD not valid.  Partial Result:
06/05/2006 04:32:06 PM - SYSTEM STATS: Time:2.1238 Method:cmd.php Processes:1 Threads:N/A Hosts:3 HostsPerProcess:3 DataSour
ces:17 RRDsProcessed:12


日志中的内容，现在不能显示图片，我参照上面的方法都做了检测了，rra目录下不能生成rrd图片，权限和路径都没问题

风流涕淌

偶很郁闷，什么都有，就是没图片,用的是rrdtool1。2。10,cacti0。86g 在rra目录下有rrd文件,但一点点别的，就什么也没有，没有图片，为什么呢

joecen

原帖由 风流涕淌 于 2006-6-7 17:27 发表
偶很郁闷，什么都有，就是没图片,用的是rrdtool1。2。10,cacti0。86g 在rra目录下有rrd文件,但一点点别的，就什么也没有，没有图片，为什么呢

将 rrdtool改回1.0的版本试试。