恢复root口令时制作应急盘出错(急!!!)

菜虾

制作root盘成功

Root filesystem floppy creation complete.

  /dev/fd0135ds18
  Extended Fast File System:  Volume:

  ** Phase 1 - Check Blocks and Sizes
  ** Phase 2 - Check Pathnames
  ** Phase 3 - Check Connectivity
  ** Phase 4 - Check Reference Counts
  ** Phase 5 - Check Synchronous Write Log
  ** Phase 6 - Check Free List Bitmap
  3 files 2604 blocks 268 free

135ds18 floppy created and checked successfully.
Press <RETURN> to continue

制作boot盘失败

Emergency Boot and Root Filesystems
-----------------------------------

Please choose the type of filesystem.

        1. Root filesystem
        2. Boot filesystem
        3. Single floppy Boot and Root filesystem (2.88Mb only)
        4. Root filesystem with network utilities

If you have high density (1.44M) disks, you must create separate root
and boot filesystem floppies. The root floppy must be prepared first.

If you have extra density (2.88Mb) disks, you can choose to have both
the root and boot filesystems on the same floppy disk.

Enter an option or q to quit: 2

Boot filesystem creation
------------------------

Please choose the boot floppy style.

        1. System specific boot
        2. Generic boot (builds a special kernel)
        3. System specific boot with networking enabled
           (Current system must have functional network)

The System specific boot floppy can only boot the machine it was created on.

The Generic boot floppy can be used to boot any machine.

Enter an option or q to quit: 2

Insert a 135ds18 floppy into drive 0
Press <RETURN> to continue or q to quit:

Would you like to format the floppy first? (y/n) y
formatting /dev/rfd0135ds18 ...
  track 79  head 1
done
verifying /dev/rfd0135ds18 ...
  track 79
Formatting completed successfully

Copying files to /dev/fd0135ds18 ...
Attempting to build a generic kernel using currently installed drivers:
Attempting to build a generic kernel using currently installed drivers:

        The UNIX Operating System will now be rebuilt.
        This will take a few minutes.  Please wait.

        Root for this system build is /

idbuild: idmkunix had errors.
System build failed.

Warning: Failed to build a kernel. Look in /tmp/FD.log for details
Building a generic kernel using installation drivers only:

        The UNIX Operating System will now be rebuilt.
        This will take a few minutes.  Please wait.

        Root for this system build is /

idbuild: idmkunix had errors.
System build failed.

Error: Cannot build a kernel, there are problems with the link kit
Error: Boot filesystem floppy creation failed. Try again.
#

检查FD.log文件显示如下

# cat FD.log

LINE: XSEMMAX   100
WARNING: The value of parameter 'XSEMMAX', 100, should be within (20, 90)

"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: too many arr
ay(2) initializers
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: too many arr
ay(2) initializers
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: too many ini
tializers; missing } ?
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: illegal lhs
of assignment operator
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: unacceptable
operand of &
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: cannot recov
er from earlier errors: goodbye!
ERROR: '/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.c' will not compil
e properly

i386ld space.o fatal: Can't open file /var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.
d/Stp/space.o for input
ERROR: Can not link-edit unix


LINE: XSEMMAX   100
WARNING: The value of parameter 'XSEMMAX', 100, should be within (20, 90)

"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: too many arr
ay(2) initializers
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: too many arr
ay(2) initializers
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: too many ini
tializers; missing } ?
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: illegal lhs
of assignment operator
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: unacceptable
operand of &
"/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.h", line 74: cannot recov
er from earlier errors: goodbye!
ERROR: '/var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/Stp/space.c' will not compil
e properly

i386ld space.o fatal: Can't open file /var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.
d/Stp/space.o for input
ERROR: Can not link-edit unix

#


希望各位大侠帮忙指点:em11::em11:一下！如有操作失误请指出,谢谢!

[ 本帖最后由 菜虾 于 2005-11-16 02:49 编辑 ]

sdccf

应急盘最好在安装完系统后制作，如果另外安装了连接核心的软件或硬件再制作就可能出现问题。