关于5.06外插网卡的问题！！

ql619

我在笔记本中装UNIX5.06，可我的网卡是外插的 8139的网卡，有什么办法可以装上吗？万分感谢！！！！！

ql619

没有人回答吗？

ustcboy

你的网卡是PCMCIA卡吗?说清楚一点,大家也好给你出主意

ql619

什么叫PCMCIA卡？？？我不懂，请赐教呀！！！谢谢！！
网卡上写着：
EN 238
10/100 Fast Ethernet
CardBus PC Card

我急呀！！

ustcboy

你把你卡子的说明贴出来吧,我帮你看看

ql619

Comments for 8139too.c version 1.0.0
2001/10/31 by ShuChen Shao

1.This driver was originally based on 8139too.c version "0.9.15".
       
2.It has been enhanced to support RTL8139C+ PCI ethernet chips and tested in 2.4.2 kernel.

3.RTL8139C+ PCI ethernet chips is set to support C+ mode by default.
  If FORCE_C_Mode below is enabled, the RTL8139C+ chip will be forced to support C mode
  after reboot.

4.This program can be compiled using the attached Makefile.
  And the object file named 8139too.o should be moved to the directory
  /lib/modules/2.4.2-2/kernel/drivers/net/

5.It can support Auto-Negotiation ability,that is
        10-half         0x01
        10-full         0x02
        100-half 0x04
        100-full 0x08
  If 10-half mode is expected, it can be achieved by the following steps:
        #ifconfig eth0 down
        #rmmod 8139too
        #insmod 8139too media=0x01

6.If the "Install Type", selected during the Linux install procedure, is "laptop",
  this driver can work normally for CardBus application without any modification.
  Otherwise, reinstall Linux and select "Install Type" as "laptop".
  Then this driver can also work.

##############################################################################################
Comments for 8139too.c version 1.0.1
2001/11/21 by ShuChen Shao

1.It is able to support RTL8139C+ PCI ethernet chips in RedHat 7.2 (kernel 2.4.7).
  In addition, it is backward compatiable with RedHat 7.1 (kerne 2.4.2).


等待之中
补充一句，这是Linux的，没有找到UNIX的。

ak57

用PCI的8139 OPEN SERVER的驱动试一下，我有PCI接口的驱动，但没PCMCIA接口的，但我认为可以。
Email: maxwong@langchaobj.com.cn

answer

要8139的驱动~~

ql619

8139的驱动安装了，没有用。网卡是外挂的。

htldm

需要PCMCIA接口的驱动。