FreeBSD 6.1下图形界面KDE和中文输入法SCIM安装(成功)!!!

hy0kl

安装五笔时出错.

www# pwd
/usr/ports/chinese/scim-tables
www# make install clean
===>  Vulnerability check disabled, database not found
===>  Extracting for zh-scim-tables-0.5.4_3
===>  Vulnerability check disabled, database not found
=> MD5 Checksum OK for scim-tables-0.5.4.tar.gz.
=> SHA256 Checksum OK for scim-tables-0.5.4.tar.gz.
tar: Failed to set default locale
===>  Patching for zh-scim-tables-0.5.4_3
===>  Applying FreeBSD patches for zh-scim-tables-0.5.4_3
===>   zh-scim-tables-0.5.4_3 depends on executable: scim-make-table - not found
===>    Verifying install for scim-make-table in /usr/ports/textproc/scim-table-imengine
===>  Vulnerability check disabled, database not found
Define WITH_SKIM to enable skim support
===>  Extracting for scim-table-imengine-0.5.6_2
=> MD5 Checksum OK for scim-tables-0.5.6.tar.gz.
=> SHA256 Checksum OK for scim-tables-0.5.6.tar.gz.
tar: Failed to set default locale
===>  Patching for scim-table-imengine-0.5.6_2
===>  Applying FreeBSD patches for scim-table-imengine-0.5.6_2
===>   scim-table-imengine-0.5.6_2 depends on executable: scim - not found
===>    Verifying install for scim in /usr/ports/textproc/scim
===>  Vulnerability check disabled, database not found
===>  Extracting for scim-1.4.4_2
=> MD5 Checksum OK for scim-1.4.4.tar.gz.
=> SHA256 Checksum OK for scim-1.4.4.tar.gz.
tar: Failed to set default locale
===>  Patching for scim-1.4.4_2
/usr/bin/sed -i.bak 's|$(datadir)/pixmaps|$(prefix)/share/gnome/pixmaps|'  /usr/ports/textproc/scim/work/scim-1.4.4/data/pixmaps/Makefile.in
/usr/bin/sed -i.bak -e 's|$(datadir)/app|$(prefix)/share/gnome/app| ;  s|$(datadir)/control|$(prefix)/share/gnome/control| ;  /^scim_setup_LDFLAGS/s|=|= -pthread|'  /usr/ports/textproc/scim/work/scim-1.4.4/extras/setup/Makefile.in
===>   scim-1.4.4_2 depends on executable in : gmake - found
===>   scim-1.4.4_2 depends on file: /usr/local/bin/intltool-extract - not found
===>    Verifying install for /usr/local/bin/intltool-extract in /usr/ports/textproc/intltool
===>  Vulnerability check disabled, database not found
===>  Extracting for intltool-0.35.0
=> MD5 Checksum OK for gnome/intltool-0.35.0.tar.bz2.
=> SHA256 Checksum OK for gnome/intltool-0.35.0.tar.bz2.
===>   intltool-0.35.0 depends on file: /usr/local/bin/perl5.8.8 - found
tar: Failed to set default locale
===>  Patching for intltool-0.35.0
===>   intltool-0.35.0 depends on file: /usr/local/bin/perl5.8.8 - found
===>  Applying FreeBSD patches for intltool-0.35.0
===>   intltool-0.35.0 depends on file: /usr/local/lib/perl5/site_perl/5.8.8/mach/XML/Parser.pm - not found
===>    Verifying install for /usr/local/lib/perl5/site_perl/5.8.8/mach/XML/Parser.pm in /usr/ports/textproc/p5-XML-Parser
===>  Vulnerability check disabled, database not found
===>  Extracting for p5-XML-Parser-2.34_2
=> MD5 Checksum OK for XML-Parser-2.34.tar.gz.
=> SHA256 Checksum OK for XML-Parser-2.34.tar.gz.
===>   p5-XML-Parser-2.34_2 depends on file: /usr/local/bin/perl5.8.8 - found
tar: Failed to set default locale
===>  Patching for p5-XML-Parser-2.34_2
===>   p5-XML-Parser-2.34_2 depends on file: /usr/local/bin/perl5.8.8 - found
===>   p5-XML-Parser-2.34_2 depends on file: /usr/local/bin/perl5.8.8 - found
===>   p5-XML-Parser-2.34_2 depends on shared library: expat.6 - found
===>  Configuring for p5-XML-Parser-2.34_2
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LC_ALL = (unset),
        LC_CTYPE = "zh_CN.EU",
        LC_ALL_zh_CN.ENC = "",
        LANG = "zh_CN.EUC"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C".
Checking if your kit is complete...
Looks good
Unable to find a perl 5 (by these names: /usr/local/bin/perl5.8.8 perl perl5 perl5.8.8 miniperl, in these dirs: /sbin /bin /usr/sbin /usr/bin /usr/games /usr/local/sbin /usr/local/bin /usr/X11R6/bin /root/bin /usr/local/bin)
Writing Makefile for XML:arser::Expat
Writing Makefile for XML:arser
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LC_ALL = (unset),
        LC_CTYPE = "zh_CN.EU",
        LC_ALL_zh_CN.ENC = "",
        LANG = "zh_CN.EUC"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C".
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LC_ALL = (unset),
        LC_CTYPE = "zh_CN.EU",
        LC_ALL_zh_CN.ENC = "",
        LANG = "zh_CN.EUC"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C".
===>  Building for p5-XML-Parser-2.34_2
/usr/ports/textproc/p5-XML-Parser/work/XML-Parser-2.34/0: not found
*** Error code 127

Stop in /usr/ports/textproc/p5-XML-Parser/work/XML-Parser-2.34.
*** Error code 1

Stop in /usr/ports/textproc/p5-XML-Parser.
*** Error code 1

Stop in /usr/ports/textproc/intltool.
*** Error code 1

Stop in /usr/ports/textproc/scim.
*** Error code 1

Stop in /usr/ports/textproc/scim-table-imengine.
*** Error code 1

Stop in /usr/ports/chinese/scim-tables.
*** Error code 1

Stop in /usr/ports/chinese/scim-tables.

hy0kl

偶正努力中,SCIM 终于装上了,就差配置了.

原来每次装都报错,偶用网友的 N 种方法试过 N + 1 次.

这次终于让偶尝到成功的喜悦了.

hy0kl

参考本文,偶已经成功安装了五笔,特来顶帖.

不过偶在用 ports 安装时也报错;只好通过 FTP 来 pakcage 安装,没想到成了.

gookings

好帖，支持，再看一遍

scq_sonia

看看容易，做做难

lunanmail

顶顶

lzy741229

还是看一看我的贴吧。
http://bbs.chinaunix.net/viewthread.php?tid=1046250
安装后的桌面：


[ 本帖最后由 lzy741229 于 2008-2-5 10:56 编辑 ]

isqlw

不错的文章，学习了，顶！

isqlw

请教，如何将FreeBSD6.3安装在VMWARE Workstation 5.5上，并能支持KDE？谢谢！

shengshuai

tks ,i will try it .