- 论坛徽章:
- 0
|
回复 2楼 meteor06 的帖子
我看过安装指导, 应该是.dd文件, 但是我看驱动加载的地方不太明白,我把LSI 的安装指导帖下来,希望大家能够给我一些指导:
************************ Installing the SCO UNIX Driver *********************
* * * * * * Procedure 1: New System Installation * * * * * * *
This procedure installs SCO UNIX onto a hard disk drive. This installation is
necessary to build a new UNIX kernel that includes your lsil driver. During
installation, you are given the option of retaining current partitions on
the root hard disk. For instance, you could have a DOS partition or a user
UNIX partition already established on the drive. For more details on UNIX
installation, refer to the SCO OpenServer Handbook.
1. Link the lsil BTLD into the UNIX kernel during installation.
a. Insert the SCO UNIX installation diskette and reboot the system. For
SCO OpenServer 5, this diskette is labeled Boot Disk.
b. At the "boot:" prompt, type:
link
Press Enter.
c. At the next prompt, type:
lsil
Do not remove the diskette. Press Enter.
d. When prompted during the installation, insert either the proper
installation diskette or the lsil BTLD diskette, and press Enter.
The system may prompt you to enter a routine:
"Please enter
which routine (0-40) to replace '?' to list),
'a' to add "lsilinit" at the end [default],
'n' to do nothing, or 'q' to quit"
Enter the indicated routine number that proceeds this message.
Then, the system may prompt with another inquiry:
"Please enter
which routine (0-2) to replace '?' to list),
'a' to add "lsilpoll" at the end [default],
'n' to do nothing, or 'q' to quit"
Enter the indicated routine number that proceeds this message.
e. Continue the installation according to the SCO UNIX documentation.
f. The SCO OpenServer 5 system automatically creates a file, unix.safe,
during installation. To access this UNIX kernel, type after the "boot:"
prompt:
unix.safe
2. Install SCSI device support by continuing from Procedure 2, step 3.
* * * * * * Procedure 2: Existing System Installation * * * * *
This procedure assumes SCO UNIX is already installed on a hard disk drive.
This installation is necessary to build a new UNIX kernel that includes the
proper LSI Logic host adapter driver. The basic steps for accomplishing
this task are outlined below. For more details on UNIX installation, refer to
the SCO UNIX System Administrator's Reference Manual.
1. The SCO OpenServer 5 system automatically creates a file, unix.safe, during
installation. To access this UNIX kernel, type after the "boot:" prompt:
unix.safe
2. Installing the lsil driver
a. Insert the lsil BTLD diskette in the drive and type:
installpkg
Press Enter to continue.
b. A prompt appears to insert the requested diskette. Since the BTLD
diskette is already inserted, press Enter.
c. A prompt now asks for the name of the package. Type:
lsil
Press Enter to continue.
d. If a driver is already present from a previous installation, a prompt
inquires about replacing it. Press "y" for yes.
e. Once the install package (installpkg) has completed, relink the kernel
by typing:
/etc/conf/cf.d/link_unix
at the command prompt.
f. The system executes the command and then prompts for a series of
responses to:
1. Do you want this kernel to boot by default (y/n)?
Type: y
Press Enter.
The system backs up the old kernel.
2. Do you want the kernel environment rebuilt (y/n)?
Type: y
Press Enter.
g. To activate the new kernel, you must reboot the system. At the command
prompt, type:
reboot
Press Enter.
3. Adding a SCSI Disk Drive
Note: If you are not adding a SCSI or Fibre Channel disk drive to this
system, go to step 4.
a. At the command prompt, type:
mkdev hd
Press Enter.
b. The system prompts for the identifier of the host adapter that supports
this device. If the default is correct, press Enter. If the default is
not correct, type:
lsil
Press Enter.
c. The system prompts for the host adapter that supports the disk drive.
Type the correct host adapter number and press Enter.
If an additional LSI Logic host adapter is being added to the SCO UNIX
kernel, the system may prompt if you want to update the link-kit (add
another host adapter). Type y and press Enter. If you entered the host
adapter number incorrectly, type n, and press Enter. The system then
prompts for the host adapter identifier of the preceding step.
d. With SCO OpenServer 5, the system prompts for the bus number of
the disk drive. Since LSI Logic host adapters support one bus per adapter,
press Enter to get the default of zero, or type 0 (zero) and press
Enter.
e. The system prompts for the target ID of the disk drive. Type the
ID number of the disk drive and press Enter.
f. The system prompts for the Logical Unit Number (LUN) of the disk drive.
Type the desired LUN and press Enter, or press Enter for the default
value of zero.
g. The system prompts you to update the Configuration file. Type y
and press Enter if the displayed values are correct. Type n if the
values are incorrect, and retry from step 3d.
h. A prompt appears to create a new kernel. Type y if this is the last
device to be added, or type n if additional devices are to be added.
Go to step 6, "Rebuilding the Kernel," if you replied y; return to step
3 if you replied n.
我的的那个差啊, 对照着做的时候在:boot 界面
输入:link
下一步输入:lsil
然后它提示我放入写好的驱动软盘,回车后显示加载上了SCSI驱动, 但是这里有个ERROR:no root disk ...
我选择了继续安装,下面的安装选择CD-ROM的时候,它默认为SCSI CD-ROM 然后显示的SCSI设备是卡的信息
我的机器是IDE的CD-ROM 然后我选择 IDE CD-ROM
接下来的安装在选择键盘后开始拷贝文件,然后提示我: no root disk has been detected...
然后就不能安装了,然后重起.
希望大哥们能够指导我,在线等...谢谢. |
|
免费注册
发表于 2006-05-24 15:10
发表于 2006-05-25 09:12
