- 论坛徽章:
- 1
|
前天去给几台T2000安装系统， 安装完后要求给升级T2000 firmware! 没办法,只好从sunsolve 里下载FLASH PATCH!现把安装步骤说一下:
升级FIRMWARE 有两种方法.
Method 1: From the System Controller console
Method 2: From the Solaris console
考虑到安全及方便,我选择了从系统安装:
1.查看老版本的Firmware 版本:
Sun System Firmware is composed of the following six individually
versioned components:
- Advanced Lights Out Manager CMT (ALOM-CMT)
- vBSC
- Reset
- Hypervisor
- Openboot (OBP)
- Power On Self Test (POST)
SC>showhost
1. Login to the system as root via the network using telnet
or rlogin or via the System Controller SERIAL MGT port.
2. Change directory to /tmp
# cd /tmp/
3. If there is not a subdirectory named 'images', then create it:
# mkdir images
4. Change directory to ./images
# cd images
5. Copy the 'sysfwdownload' binary and Sun System Firmware image
(e.g. Sun_System_Firmware-<version>-<platform>-.bin) from the SunSolve
site to the /tmp/images directory.
6. Use the sysfwdownload utility to download the Sun System Firmware image
to the System Controller:
# /tmp/images/sysfwdownload Sun_System_Firmware-6_2_0-Sun_Fire_T2000.bin
注意:这时这条命令不能执行,没有权限.然后我使用下面的命令使其执行:
#chmod 755 sysfwdownload
# /tmp/images/sysfwdownload Sun_System_Firmware-6_2_0-Sun_Fire_T2000.bin
.......... (10%).......... (20%).......... (30%).......... (41%).......... (51%).......... (61%).......... (71%).......... (82%).......... (92%)........ (100%)
Download completed successfully. *****这步是将FIRMWARE 信息DOWNLOAD 到SC 闪存里:接下来要shutdown os and power off system ,使用flashupdate升级.******
bash-3.00# shutdown -y -g0 -i0
Shutdown started. Fri Nov 17 19:29:44 CST 2006
Changing to init state 0 - please wait
Broadcast Message from root (console) on ema5014 Fri Nov 17 19:29:44...
THE SYSTEM ema5014 IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged
showmount: ema5014: RPC: Program not registered
bash-3.00# svc.startd: The system is coming down. Please wait.
svc.startd: 73 system services are now being stopped.
Nov 17 19:29:52 ema5014 rpcbind: rpcbind terminating on signal.
Nov 17 19:29:52 ema5014 syslogd: going down on signal 15
svc.startd: The system is down.
syncing file systems... done
Program terminated
{d} ok
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Sun(tm) Advanced Lights Out Manager CMT v1.1.7
sc> console
Warning: the console command is being ignored because the password for admin is not set.
Setting password for admin.
New password: *****
Re-enter new password: *****
Warning: The password entered has been accepted but does not meet the recommended guidelines for security.
sc>
sc>
sc> console
Enter #. to return to ALOM.
{d} ok sc>
{d} ok sc>
sc> poweroff *****注意,一定要关闭电源******
Are you sure you want to power off the system [y/n]? y
sc>
SC Alert: SC Request to Power Off Host.
SC Alert: Host system has shut down.
sc> showkeyswitch *****注意,一定要查看keyswitch是否在NORMAL状态.如果处在LOCK状态,把他打到正常状态.*******
Keyswitch is in the NORMAL position.
sc> flashupdate -s 127.0.0.1 ******升级固件*********
SC Alert: System poweron is disabled.
......................................................................................................................................................................
Update complete. Reset device to use new software.
SC Alert: SC firmware was reloaded
sc> resetsc *****重起SC使更新的固件生效*****
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
ALOM BOOTMON v1.2.5
ALOM Build Release: 000
Reset register: 00000000
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Loading the runtime image... VxWorks running.
Starting Advanced Lights Out Manager CMT v1.2.6
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Current mode: NORMAL
Attaching network interface lo0... done.
Attaching network interface motfec0.... done.
Booting from Segment 0
SC Alert: SC System booted.
Sun(tm) Advanced Lights Out Manager CMT v1.2.6
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: FRI NOV 17 11:52:33 2006
Wait, 1 - 3 seconds
Read the TOD Clock: FRI NOV 17 11:52:35 2006
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
Please login: admin
Please Enter password: *****
sc> poweron *********进入系统**********
sc>
SC Alert: Host System has Reset
sc>
sc> console
Enter #. to return to ALOM.
Done
0:0>IO-Bridge Tests....Done
0:0>INFO:
0:0> POST Passed all devices.
0:0>POST: Return to VBSC.
0:0>Master set ACK for vbsc runpost command and spin...
SC Alert: Host System has Reset
SC Alert: Host system has shut down.
/
Sun Fire T200, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.23.4, 8184 MB memory available, Serial #69342928.
Ethernet address 0:14:4f:22:16:d0, Host ID: 842216d0. |
|
免费注册
发表于 2006-11-21 09:59
