- 论坛徽章:
- 0
|
首先,先说明一下关于磁带库的内部连接情况。
ADIC Scalar1k磁带库内部组件:一个自动机械手、两台IBM LTO磁带驱动器,一个含12个磁带槽的Insert/Eject交换舱,一个SNC5100,及188个磁带槽位。
设备的接口状况:LTO驱动器以及磁带库机械手均为SCSI端口,每个设备均有两个同等的LVD SCSI端口。SNC有4个SCSI接口和2个Fibre Channel接口。
磁带库内各个设备的作用:
自动机械手是磁带库内的核心部件,它是一个通过与应用软件想结合而代替人手来抓取和移动磁带的自动化装置;
驱动器用来从磁带中读写备份数据;
Insert/Eject磁带交换舱用来在备份作业不中断的情况下向磁带库内添加或取出一个或多个磁带;
磁带槽位用于存放待读写的磁带
SNC是将SCSI信号与光信号相互转换的装置,由于驱动器自身的设备是SCSI的端口方式,因此必须通过该装置才能连入SAN的光纤环境。
驱动器的连接方式为:驱动器D1的SCSI端口一连接一个IBM LTO驱动器的专用终结器,端口二通过SCSI电缆与驱动器D2的端口一连接,驱动器D2的端口二通过另一条SCSI电缆与磁带库中的SNC上的SCSI端口一连接,
机械手的连接方式为:机械手的SCSI端口一连接一个ADIC Scalar1k专用终结器,端口二通过第三条SCSI电缆与SNC的第二个SCSI端口互连。
SNC的连接方式:SNC除了有两个SCSI端口按上诉方式分别与驱动器和机械手连接外,它的两个FC端口“FC1”、“FC2”分别通过两条光纤“库A”、“库B”与构成SAN环境的两个Brocade 光纤交换机连接“S1”、“S2”连接。
下面在来介绍一下操作系统层面的设置。
安装软件:
# cd /cdrom/networker_vol_1/solaris
# pkgadd -d .
The following packages are available:
1 LGTOclnt NetWorker for Solaris (Backup/Recover) Client
(sparc) 6.1.1.Build.238
2 LGTOdrvr NetWorker for Solaris (Backup/Recover) Device Drivers
(sparc) 6.1.1.Build.238
3 LGTOlicm NetWorker for Solaris (Backup/Recover) Licensing Manager
(sparc) 6.1.1.Build.238
4 LGTOman NetWorker for Solaris (Backup/Recover) Man
(sparc) 6.1.1.Build.238
5 LGTOnode NetWorker for Solaris (Backup/Recover) Storage Node
(sparc) 6.1.1.Build.238
6 LGTOserv NetWorker for Solaris (Backup/Recover) Server
(sparc) 6.1.1.Build.238
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Processing package instance <LGTOclnt> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Client
(sparc) 6.1.1.Build.238
Legato Systems, Inc.
NetWorker(TM) - Release 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc. All rights reserved.
This product includes software developed by the University of
California, Berkeley and its contributors.
To set up a NetWorker storage node, licensing manager or client, you
need to supply a directory for the nsrexecd state file.
Below is a list of some of the filesystems, with their free space, which you
might consider:
/home :14200365
/oracle : 8176003
/ : 6509292
Directory to use for client, licensing and server information [/home/nsr]?
The nsrexecd program restricts access to a select set of NetWorker
servers. Please enter the names of each computer running a NetWorker
server that will back up this computer, one name at a time. If a
computer has more than one network interface, please enter each
interface's name (one at a time).
Enter the first NetWorker server's name [no more]:
Allowing access to all NetWorker servers.
Start NetWorker daemons at end of install [yes]? no
Using </usr> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOclnt> [y,n,?] y
Installing NetWorker for Solaris (Backup/Recover) Client as <LGTOclnt>
## Installing part 1 of 1.
/lib/X11/app-defaults/Networker
/usr/bin/networker <symbolic link>
/usr/bin/nsrfile
/usr/bin/nsrports
/usr/bin/nsrwatch
/usr/bin/nwadmin
/usr/bin/nwarchive <symbolic link>
/usr/bin/nwbackup
/usr/bin/nwrecover
/usr/bin/nwretrieve
/usr/bin/preclntsave
/usr/bin/pstclntsave
/usr/bin/recover
/usr/bin/save
/usr/bin/savepnpc <symbolic link>
/usr/lib/X11/app-defaults/Networker
/usr/lib/nsr/C/nsr.help
/usr/lib/nsr/client.nsrrequest
/usr/lib/nsr/de_de/nsr.help
/usr/lib/nsr/gls/cm/registry
/usr/lib/nsr/gls/lc/os/portable/C
/usr/lib/nsr/nw_client.txt
/usr/lib/nsr/nw_server.txt
/usr/lib/nsr/nw_snode.txt
/usr/lib/nsr/poin.cln
/usr/lib/nsr/poin.snd.gems
/usr/lib/nsr/poin.srv
/usr/lib/nsr/product.res
/usr/lib/nsr/prrm.cln
/usr/lib/nsr/prrm.snd.gems
/usr/lib/nsr/prrm.srv
/usr/lib/nsr/server.nsrrequest
/usr/lib/nsr/snode.nsrrequest
/usr/lib/nsr/uasm
/usr/sbin/LGTO.clnt.rtr
/usr/sbin/LGTO.serv.rtr
/usr/sbin/lcmap.sc30
/usr/sbin/mminfo
/usr/sbin/mmlocate
/usr/sbin/mmpool
/usr/sbin/networker.cluster
/usr/sbin/nsr_shutdown
/usr/sbin/nsr_support <symbolic link>
/usr/sbin/nsradmin
/usr/sbin/nsralist
/usr/sbin/nsrarchive
/usr/sbin/nsrclone
/usr/sbin/nsrdmpix
/usr/sbin/nsrexec
/usr/sbin/nsrexecd
/usr/sbin/nsrinfo
/usr/sbin/nsrmm
/usr/sbin/nsrndmp_2fh
/usr/sbin/nsrndmp_recover
/usr/sbin/nsrndmp_save
/usr/sbin/nsrretrieve <symbolic link>
/usr/sbin/nsrsup
/usr/sbin/preclntsave <symbolic link>
/usr/sbin/pstclntsave <symbolic link>
/usr/sbin/save <symbolic link>
/usr/sbin/savefs
/usr/sbin/savepnpc <symbolic link>
[ verifying class <none> ]
## Executing postinstall script.
Installing NetWorker home directory in /home/nsr
nsr-izing system files
nsr-izing system files
Initializing //nsr/res/servers
Creating /etc/init.d/networker
Creating /etc/rc2.d/S95networker
Creating /etc/rc0.d/K05networker
Completing Installation
NetWorker successfully installed on `hostname'!
Installation of <LGTOclnt> was successful.
Processing package instance <LGTOdrvr> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Device Drivers
(sparc) 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc.
All Rights Reserved.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOdrvr> [y,n,?] y
Installing NetWorker for Solaris (Backup/Recover) Device Drivers as <LGTOdrvr>
## Executing preinstall script.
## Installing part 1 of 1.
/etc/LGTOuscsi/algnelem
/etc/LGTOuscsi/ascdcode
/etc/LGTOuscsi/changers
/etc/LGTOuscsi/dpy120
/etc/LGTOuscsi/dpy210
/etc/LGTOuscsi/erase
/etc/LGTOuscsi/exacln
/etc/LGTOuscsi/format
/etc/LGTOuscsi/hpflip
/etc/LGTOuscsi/ielem
/etc/LGTOuscsi/inquire
/etc/LGTOuscsi/ldunld
/etc/LGTOuscsi/lrescan
/etc/LGTOuscsi/lreset
/etc/LGTOuscsi/lus_add_fp_devs
/etc/LGTOuscsi/lusbinfo
/etc/LGTOuscsi/lusdebug
/etc/LGTOuscsi/msense
/etc/LGTOuscsi/ndmpjbconf
/etc/LGTOuscsi/pmode
/etc/LGTOuscsi/rcap
/etc/LGTOuscsi/rdyinp
/etc/LGTOuscsi/relem
/etc/LGTOuscsi/sjiielm
/etc/LGTOuscsi/sjiinq
/etc/LGTOuscsi/sjimm
/etc/LGTOuscsi/sjirdp
/etc/LGTOuscsi/sjirdtag
/etc/LGTOuscsi/sjirelem
/etc/LGTOuscsi/sjirjc
/etc/LGTOuscsi/tur
/etc/LGTOuscsi/wipe64
/etc/LGTOuscsi/writebuf
/usr/kernel/drv/lus
/usr/kernel/drv/lus.conf
/usr/kernel/drv/lus32
/usr/kernel/drv/op
/usr/kernel/drv/op.conf
/usr/kernel/drv/sparcv9/lus
/usr/kernel/drv/sparcv9/op
/usr/lib/nsr/libscsi.so <symbolic link>
/usr/lib/nsr/libscsi.so.1
/usr/lib/nsr/libscsi27.so.1
/usr/lib/nsr/libsji.so <symbolic link>
/usr/lib/nsr/libsji.so.1
/usr/lib/nsr/libstlemass.so
/usr/lib/nsr/libstlibm.so
/usr/lib/nsr/libstlstk.so
[ verifying class <none> ]
## Executing postinstall script.
/usr/kernel/drv/lus
/usr/kernel/drv/lus32
/usr/lib/nsr/libscsi.so.1
/usr/lib/nsr/libscsi27.so.1
Legato SCSI passthrough driver configured and loaded
Legato optical driver configured - will load at next boot.
Installation of <LGTOdrvr> was successful.
Processing package instance <LGTOlicm> from </cdrom/networker_vol_1/solaris>
NetWorker for Solaris (Backup/Recover) Licensing Manager
(sparc) 6.1.1.Build.238
Legato Systems, Inc.
NetWorker(TM) - Release 6.1.1.Build.238
Copyright (c) 1990-2001, Legato Systems, Inc. All rights reserved.
This product includes software developed by the University of
California, Berkeley and its contributors.
To set up a NetWorker storage node, licensing manager or client, you
need to supply a directory for the nsrexecd state file.
Directory /nsr exists, it will be used as the default.
Below is a list of some of the filesystems, with their free space, which you
might consider:
/home :14200274
/oracle : 8176003
/ : 6457297
Directory to use for client, licensing and server information [/nsr]?
Start NetWorker daemons at end of install [yes]? no
Using </usr> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <LGTOlicm> [y,n,?] y |
|