Writing Linux LCD drivers ——本文深入地分析了framebuffer设备驱动的结构 作者：JimSheng Writing Linux LCD drivers Abstract 1 LCD Module\Driver\Controller 2 Linux Frame Buffer Driver 2.1 Why Frame Buffer? 2.2 What is Frame Buffer Devices? 2.3 How to Write Frame Buffer Device Drivers? 3 Analysis of Linux Frame Buffer Driver Source Codes 3.1 fb.h 3.2 fbmem.c 4 Skeleton of LCD controller ri...

Writing Linux LCD drivers ——本文深入地分析了framebuffer设备驱动的结构 作者：JimSheng Writing Linux LCD drivers Abstract 1 LCD Module\Driver\Controller 2 Linux Frame Buffer Driver 2.1 Why Frame Buffer? 2.2 What is Frame Buffer Devices? 2.3 How to Write Frame Buffer Device Drivers? 3 Analysis of Linux Frame Buffer Driver Source Codes 3.1 fb.h 3.2 fbmem.c 4 Skeleton of LCD controller ri...

Writing Linux LCD drivers Writing Linux LCD drivers Abstract 1 LCD Module\Driver\Controller 2 Linux Frame Buffer Driver 2.1 Why Frame Buffer? 2.2 What is Frame Buffer Devices? 2.3 How to Write Frame Buffer Device Drivers? 3 Analysis of Linux Frame Buffer Driver Source Codes 3.1 fb.h 3.2 fbmem.c 4 Skeleton of LCD controller rivers 4.1 Allocate a system memory as video memory 4.2 Implem...

[color="#cc33cc"]——本文深入地分析了framebuffer设备驱动的结构 作者：JimSheng [color="#3366cc"] Abstract 1 LCD ModuleDriverController 2 Linux Frame Buffer Driver 2.1 Why Frame Buffer? 2.2 What is Frame Buffer Devices? 2.3 How to Write Frame Buffer Device Drivers? 3 Analysis of Linux Frame Buffer Driver Source Codes 3.1 fb.h 3.2 fbmem.c 4 Skeleton of LCD controller rivers 4.1 Allocate a s...

Abstract 1 LCD Module\Driver\Controller 2 Linux Frame Buffer Driver 2.1 Why Frame Buffer? 2.2 What is Frame Buffer Devices? 2.3 How to Write Frame Buffer Device Drivers? 3 Analysis of Linux Frame Buffer Driver Source Codes 3.1 fb.h 3.2 fbmem.c 4 Skeleton of LCD controller rivers 4.1 Allocate a system memory as video memory 4.2 Implement the fb_ops functions Reference Abstract This m...

本帖最后由 Hugo801122 于 2014-03-10 10:05 编辑 本文详细介绍了LCD的控制时序和原理，linux系统下的LCD驱动架构， 并结合S3C2410分析了一个实例，20页，值得参考。 附件： 也可以从网盘地址下载： http://url.cn/QdgrPe

各位好: 显卡 : intel 集成显卡 (GM45) 驱动 : IEGD 或 系统自带 i915 驱动 请问下, 如何 写程序 调整 LVDS 设备 的 对比度 亮度, 饱和度 等 ??? 谢谢

这一个多星期主要在搞Linux LCD驱动，期间对内核源码中的drivers/video/s3c2410fb.c文件产生了一些疑惑如下： 首先请看如下的两张图片 接下来就是我的疑问了：modify_gpio(S3C2410_GPCUP, mach_info->gpcup, mach_info->gpcup_mask);中的S3C2410_GPCUP是物理地址啊？怎么能够直接访问呢？不是应该先向操作系统申请，然后再进行虚实地址映射后才可以使用吗？ 不知道我的分析错在哪里了，希望大...