网上找了半天,都不够简单明了,我自己总结以下: 把你的本地主机用户的ssh公匙文件写入到远程主机用户的~/.ssh/authorized_keys文件中,具体方法 假设本地主机localhost,远程主机remote 一,在localhost主机里的用户 运行ssh-keygen -t rsa 结果如下 Generating public/private rsa key pair. Enter file in which to save the key (/home/.username/ssh/id_rsa):#回车 Enter passphrase (empty for no passphrase):#回车 Enter ...
by shuguangshaomen - Linux文档专区 - 2009-08-18 11:22:07 阅读(839) 回复(0)
Jephe Wu (吴阿亭) 软硬件环境: 两台linux服务器A和B 都编译安装上最新版的openSSH(建议) openSSH的默认设置是允许root可以直接login. (PermitRootLogin yes),暂且保留这种设置,我们先考虑如何 用SSH直接从A到B不需要密码,假设用用户root登录到A,想SSH到B也作为root不需要密码。 1。 分别从A和B上登录作为root后运行ssh-keygen,目的是简单地在/root下创建目录.ssh,当提示输入 ...
首先在每个节点执行一下命令脚本 mkdir -p ~/.ssh chmod 700 ~/.ssh /usr/bin/ssh-keygen -t rsa 然后再需要批量分发的主机上 touch ~/.ssh/authorized_keys ssh 192.168.1.20 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys 说明:192.168.1.20是分发主机的IP地址 The authenticity of host '[color="#0000ff"]linux1 (192.168.1.100)' can't be established. RSA key fingerprint is 2...
作者: onquer 出自: http://www.linuxdiyf.com 首先在每个节点执行一下命令脚本 mkdir -p ~/.ssh chmod 700 ~/.ssh /usr/bin/ssh-keygen -t rsa 然后再需要批量分发的主机上 touch ~/.ssh/authorized_keys ssh 192.168.1.20 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys 说明:192.168.1.20是分发主机的IP地址 The authenticity of host 'linux1 (192.168.1.100)' can't be established. RSA key fingerprint is 2f:cc:a1:4...
把你的本地主机用户的ssh公匙文件写入到远程主机用户的~/.ssh/authorized_keys文件中,具体方法 假设本地主机test1,远程主机test2 一,在test1主机里的用户 运行 ssh-keygen -t rsa 结果如下 Generating public/private rsa key pair. Enter file in which to save the key (/home/.username/ssh/id_rsa):#回车 Enter passphrase (empty for no passphrase):#回车 Enter same passphrase again:#回车 Your identification has been ...
scp密码验证问题: 在serverA上: #ssh-keygen -t rsa #ls /root/.ssh id_rsa id_rsa.pub known_hosts #scp id_rsa.pub serverB:/root/.ssh/authorized_keys #scp xxx serverB:/tmp 仍然需要密码,那里错误?望高手指点!
scp密码验证问题: 在serverA上: #ssh-keygen -t rsa #ls /root/.ssh id_rsa id_rsa.pub known_hosts #scp id_rsa.pub serverB:/root/.ssh/authorized_keys #scp xxx serverB:/tmp 仍然需要密码,那里错误?望高手指点!
现在有一个问题,一台机器a用scp向另一台机器b传输文件,a机器上用ssh-keygen -t rsa 生成密钥,把id_rsa.pub的内容,已经加到了b机器user_b 用户 ~/.ssh/authorized_keys文件中,但是scp传输的时候还需要密码,到底是哪儿出了问题呢?
最近在编写定时自动执行的shell脚步中遇到一个问题。在该脚步中,需要使用scp命令将本地的文件复制到另一台机器中备份。但通常执行scp命令后都需要输入用户密码,这样在定时自动执行的shell脚步中就不适用了。 本人的第一直觉就是建立无密码用户,在scp命令中使用该用户就不需要输入用户密码了。 以下为了讨论方便,我们将执行scp命令的机器称为Client,scp命令操作的远端机器称为Server。 首先,我通过以下命令将机器...
为了使scp命令不要密码,我做了如下工作: #>ssh-keygen -b 1024 -t rsa (生成了私钥id-rsa和公钥id_rsa.pub) #>scp ./id_rsa.pub [email]root@192.168.0.204[/email]:/root/.ssh/authorized_keys 在两台机器上都运行:service ssh restart 但结果在两台机器间传文件还是需要密码,这是为什么?