ChinaUnix.net
相关文章推荐:

linux 开启ssh

首先通过物理终端进入到linux上,手工检查ssh发现没运行 /etc/init.d/sshd status sshd is stopped 手工启动服务,发现报告权限错误。 /etc/init.d/sshd start Starting sshd:/var/empty/sshd must be owned by root and not group or world-writable. [FAILED] 使用rpm -V 命令可检查到ssh的软件包正常,但某个目录的属主错误。 rpm -V openssh-server S.5..... c /etc/ssh/sshd_config .....U.. /var/empty/sshd 经查看发现这个...

by w0yz0x0 - 驱动开发 - 2014-07-24 08:30:53 阅读(2634) 回复(3)

相关讨论

一般服务器上系统安装完毕后, 要想远程管理它那么除了跟其它linux系统一样要开启配置目录下ssh 在图形界面下开启:   开始——设置——控制面板——找到sshD服务;   把启动改为自启动   这样就OK了。 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u3/108023/showart_2121992.html

by tonecan2008 - Linux文档专区 - 2009-12-15 14:58:24 阅读(1317) 回复(0)

一:执行setup命令将ssh服务加入到开机启动项目中。 二:编辑/etc/ssh/sshd_config 配置相应的选项,如permitroot login port等! 三:重新启动ssh服务--ok /etc/init.d/sshd restart 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/22697/showart_1084267.html

by ClearWind - Linux文档专区 - 2008-07-17 12:06:40 阅读(993) 回复(0)

作者: Dywesz 出自: http://www.linuxdiyf.com   红旗linux6.0的图形桌面就像Windows一样。   但是安装完毕后,要想远程管理它那么除了跟其它linux系统一样要开启配置目录下ssh外,还要在图形界面下开启:   开始——设置——控制面板——找到sshD服务;   把启动改为自启动   这样就OK了。 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/31/showart_525363.html

by sdccf - 国产Linux - 2008-04-10 14:43:59 阅读(1654) 回复(0)

linux是好,但是它把很多实用的功能都默认关闭,实在太气人了,用的时候还要现找资料 比如ftp/telnet/ssh默认情况下都是不允许登陆的 怎么开启呢? 谢谢

by zd2228 - 服务器架设 - 2004-05-10 15:21:22 阅读(3039) 回复(3)

linux是好,但是它把很多实用的功能都默认关闭,实在太气人了,用的时候还要现找资料 比如ftp/telnet/ssh默认情况下都是不允许登陆的 怎么开启呢? 谢谢

by zd2228 - 服务器应用 - 2008-06-12 14:32:18 阅读(12201) 回复(5)

守护进程怎么起啊,telnet不是安装完默认就可以用的吗?

by yiyu_66 - Linux论坛 - 2004-02-24 11:54:04 阅读(1338) 回复(6)

守护进程怎么起啊,telnet不是安装完默认就可以用的吗?

by yiyu_66 - Linux系统管理 - 2004-02-24 11:54:04 阅读(3340) 回复(6)

esxi作为一个精简版的esx,把ssh给默认关闭了,控制台也感觉专业了很多,可以使用下面方法打开ssh服务。 You have to have direct access to console 1.) While you are at the console hit ALT + F1 2.) Type in ” unsupported ” and hit Enter 3.) Go ahead and type the root password 4.) Go and edit the /etc/inetd.conf file 5.) Uncoment the line where you can see “#ssh” (line 32). Remove the “#” mark at the...

by zz.Li - Linux文档专区 - 2008-11-23 13:47:06 阅读(930) 回复(0)

1 FTP服务 $ sudo apt-get install vsftpd 修改 vsftpd 配置文件 /etc/vsftpd.conf 将 #local_enable = yes #write_enable = yes 的 # 去掉 重启FTP 服务 $ sudo /etc/init.d/vsftpd restart 2 ssh 服务 $ sudo apt-get install openssh-server 配置文件 /etc/ssh/sshd_config 保持默认 3 NFS 服务 $ sudo apt-get install nfs-kernel-server portmap 在配置文件 /etc/exports 增加如下内容,以后可以通过网络文件系统访问...

by sparkzh - Linux文档专区 - 2008-09-24 19:08:00 阅读(991) 回复(0)

作者:Koogcjz 出处:linuxdiyf.com   近日受老板之命,不得不在一台废弃的服务器上装个Solaris 10 。出于对linux的喜爱,我对这个目前最正宗的UNIX操作系统之一很自然的带有好感,最初也想趁这个机会接触下传说中的UNIX 。   然而安装后确实大失所望:略显不友好的安装流程,安装完毕后丑陋的桌面环境,以及连命令补全功能都不具备的shell,天啊,这就是最纯粹的UNIX之一?我不由的怀念起linux,就如刚接触linux时怀念Win...

by sdccf - Solaris文档中心 - 2008-05-02 22:26:33 阅读(1445) 回复(0)