ChinaUnix.net
相关文章推荐:

linux write

本帖最后由 yaoming1718 于 2010-12-09 23:30 编辑 本人初学linux 看《linux环境下c编程指南》一书 对书中例子有疑问,向大家请教 代码如下 利用write函数实现一个write_buffer函数,创建文件“test.txt”,从键盘输入字符串写入文件,成功后打开文件为乱码,求解答? 直接用write函数的话,打开test.txt则能看到正常显示。 #include #include #include #include #includ...

by yaoming1718 - Linux环境编程 - 2010-12-10 12:41:37 阅读(2709) 回复(3)

相关讨论

write函数本来是用来向一个文件句柄(file descriptor)输入内容的,通常的用法是: int fd; fd = open(filename, MODE); write(fd, buf, size); close(fd); 由于linux系统中有三个默认的句柄,即标准输入、标准输出、标准出错,对应标准C中的文件句柄(FILE)是stdin、stdout、stderr,在linux系统中是整数值0,1,2 因此,当我们往1句柄write内容时,就是在标准输出设备上显示内容,比如我们的终端上。 本文来自ChinaUnix博客,如果查...

by ferris2005 - Linux文档专区 - 2010-01-22 10:15:59 阅读(11750) 回复(0)

功能说明:传送信息。 语  法:write [用户名称][终端机编号] 补充说明:通过write指令可传递信息给另一位登入系统的用户,当输入完毕后,键入EOF表示信息结束,write指令就会将信息传给对方。如果接收信息的用户不只登入本地主机一次,你可以指定接收信息的终端机编号。 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u1/43969/showart_351347.html

by ximiff - Linux文档专区 - 2007-08-01 07:59:14 阅读(937) 回复(0)

写时复制技术最初产生于Unix系统,用于实现一种傻瓜式的进程创建:当发出fork( )系统调用时,内核原样复制父进程的整个地址空间并把复制的那一份分配给子进程。这种行为是非常耗时的,因为它需要: · 为子进程的页表分配页面 · 为子进程的页分配页面 · 初始化子进程的页表 · 把父进程的页复制到子进程相应的页中 创建一个地址空间的这种方法涉及许多内存访问,消耗许多CPU周期,并且完全破坏了高速缓存中...

by microtiger - Linux文档专区 - 2008-01-26 14:36:31 阅读(862) 回复(0)

write a linux Hardware Device Driver Learn to write and install a linux device driver to control a hardware card. We detail what functions need to be written, outline the supporting kernel functions that are available, explain how to initialize the driver and how memory is requested and allocated in an efficient manner, and provide a ``real'' driver example. By Tom Coffey and Andrew O'Shaugh...

by marsky - Linux文档专区 - 2007-02-09 17:20:48 阅读(1077) 回复(0)

本帖最后由 山丘之王MK 于 2013-06-27 16:09 编辑 最近在写一个驱动,在write设备方法中,将用户空间的数据buf传送到内核空间的data1数组中,发现在应用程中调用write失败,返回-1,也就是根本没执行内核中的write设备方法,而read却是成功的。代码如下: static ssize_t my522_write(struct file *filp, const char __user *buf, size_t size, loff_t *ppos) { unsigned long p = *ppos; unsigned int count = size; in...

by 山丘之王MK - 驱动开发 - 2013-07-21 23:46:22 阅读(1169) 回复(5)

linuxwrite命令的用法

by wethnicity - Linux新手园地 - 2010-09-28 09:32:58 阅读(5842) 回复(2)

能说明:传送信息。 语  法:wall [公告信息] 补充说明:通过wall指令可将信息发送给每位同意接收公众信息的终端机用户,若不给予其信息内容,则wall指令会从标准输入设备读取数据,然后再把所得到的数据传送给所有终端机用户。 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u1/43969/showart_351348.html

by ximiff - Linux文档专区 - 2007-08-01 08:00:08 阅读(755) 回复(0)

How to write to NTFS in linux-2.6 Here are the steps to be done in order to transfer files from a linux filesystem (JFS/XFS/Reiserfs/EXT3/whatever you prefer) to a Windows filesystem (NTFS). Table of contents How to write to NTFS in linux-2.6 In short Create an image in Windows Reboot to linux Testing NTFS write support Compiling the NTFS driver Writing Reboot to Windows Verify the files...

by Intranet - Linux文档专区 - 2006-05-27 14:08:25 阅读(656) 回复(0)

通过讨论今天终于确定,linux的系统调用write不能实现在文本文件的中间进行添加操作。它可以实现在文件尾部添加,和在文件的中间覆盖的功能。我想只要清楚内核中文件系统原理的人都会很容易理解这一点。:) 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/6889/showart_111731.html

by lc0060305 - Linux文档专区 - 2006-05-12 14:33:54 阅读(883) 回复(0)

linux c socket write 程序异常,中断 退出程序? 当 执行到 write 程序时候, 程序异常中断 退出了程序,这个是什么问题,我用的是 epoll 模式。

by fanronghua - C/C++ - 2013-04-07 11:42:18 阅读(3402) 回复(5)