ChinaUnix.net
相关文章推荐:

stm32 stop mode hse

stop [ 本帖最后由 henaldo 于 2007-11-8 12:16 编辑 ]

by henaldo - IT职业生涯 - 2007-11-08 10:46:10 阅读(3129) 回复(15)

相关讨论

请问在Securecrt下通过Xyplex Terminal Server 连接Sun 主机的console口时,通过什么按键组合 能实现stop+A的效果。 谢谢!

by efenyue - Solaris - 2003-10-30 14:18:15 阅读(830) 回复(1)

在超级终端中如何发送stop+A的指令,使主机进行OK状态??

by mazhq - Solaris - 2003-09-26 12:17:09 阅读(845) 回复(2)

The Support Tools Manager(stm) host-based utility is the primary online diagnostic tool available for the HP SureStore E Disk Array FC60. stm provides the capability for testing, configuring, and evaluating the operational condition of the disk array. stm comes with HPUX instant ignition and support media. stm User Interfaces stm present three different user three interfaces:an X-Windows int...

by s4u2003 - HP文档中心 - 2008-03-27 12:09:57 阅读(4844) 回复(0)

谁有么?还有目录:/usr/contrib/Q4/bin & /usr/conrib/bin 里面都是什么咚咚?

by zhong0912 - HP-UX - 2005-09-24 21:39:49 阅读(1326) 回复(6)

在用stm(cstm或xstm)时,只能用它来查看一些information,当执行diagnose时,无法执行。用cstm时会提示说 diagnose is disabled. 请问一下stm的某些功能是不是需要license才可以用的?

by edwin_liu - HP-UX - 2009-07-10 15:29:34 阅读(1960) 回复(1)

我们一批工程中到的HP9000系列的主机,有rp54和rc74两种,今天我发现只有一台54可以使用stm或者cstm,其它主机运行stm或者cstm的时候提示一大堆,大致意思是说可能存在以下错误:1,stm没有启动;2,cfg文件里没有配置什么LOCAL...;3,IP地址不合法;4,。。。我对stm到底需要什么条件运行也不太清楚,简单地看了看,那些不能运行的主机上的情况跟那个能运行的5470的情况没什么大的差别啊。什么diagmond进程,配置文件都有啊。 请...

by 2bedodo - HP-UX - 2004-06-15 10:27:52 阅读(1427) 回复(4)

有台机器什么都显示不到了,我想还原NVRAM的值,在超级终端里要按哪个键呢?stop+a 对应的是 ctrl + break 那 stop + n对应的是哪两个键呢?

by 醉清风 - Solaris - 2007-10-16 16:39:27 阅读(1739) 回复(7)

都说stop+a轻易不要用,对系统,硬件都不好,但作为系统管理员,我却不得不经常用它,系统经常死机,不得不用。 大家是不是有同感呢?

by 小岛蝶子 - Solaris - 2007-10-14 20:56:58 阅读(2033) 回复(6)