1、我准备利用ucos生成.bin文件后,烧到板子上的方法 可不可以写一下该方法的移植步骤。即如何生成.bin文件, 2、如果是其它移植方法,能否也写下移植步骤。
by flying2008 - 内核/嵌入技术 - 2006-07-18 21:31:52 阅读(2321) 回复(7)
The Support Tools Manager(stm) host-based utility is the primary online diagnostic tool available for the HP SureStore E Disk Array FC60. stm provides the capability for testing, configuring, and evaluating the operational condition of the disk array. stm comes with HPUX instant ignition and support media. stm User Interfaces stm present three different user three interfaces:an X-Windows int...
iar Embedded Workbench for NEC V850 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u3/90265/showart_1775851.html
iar Embedded Workbench for NEC V850 本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u3/90265/showart_1775852.html
在用stm(cstm或xstm)时,只能用它来查看一些information,当执行diagnose时,无法执行。用cstm时会提示说 diagnose is disabled. 请问一下stm的某些功能是不是需要license才可以用的?
我们一批工程中到的HP9000系列的主机,有rp54和rc74两种,今天我发现只有一台54可以使用stm或者cstm,其它主机运行stm或者cstm的时候提示一大堆,大致意思是说可能存在以下错误:1,stm没有启动;2,cfg文件里没有配置什么LOCAL...;3,IP地址不合法;4,。。。我对stm到底需要什么条件运行也不太清楚,简单地看了看,那些不能运行的主机上的情况跟那个能运行的5470的情况没什么大的差别啊。什么diagmond进程,配置文件都有啊。 请...
一共是21×3=63个,每个tug-2包含3个e1 ! ! ! ! controller SONET 1/0 framing sdh clock source internal ! au-4 1 tug-3 1 tug-2 1 e1 1 channel-group 0 timeslots 1-31 tug-2 1 e1 2 channel-group 0 timeslots 1-31 tug-2 1 e1 3 channel-group 0 timeslots 1-31 tug-2 2 e1 1 channel-group 0 timeslots 1-31 tug-2 2 e1 2 channel-group 0 timeslots 1-31 tug-2 2 e1 3 channel-group 0 timeslots 1-31 tug-2 3 e1 1 chan...
我有嵌入式实时操作系统μC/OS-II 的电子版,但是没有ucos-ii.c的源程序,请有的兄弟给我发一份,不胜感激! [email]andersmiro@126.com[/email]
stm-1的配置及有关SDH 7507的multichannel stm-1配置问题 PA-MC-stm-1SMI接到电信的sdh网上,如何划分出10-15条e1的channel?那位大侠给出一个具体配置的例子,先谢了! FW:前几天刚刚用CISCO的这块板子做了测试,具体的配置大概是: controller sonet 1/1/0 framing sdh clock source line aug mapping au-4 au-4 1 tug-3 2 mode c-12 tug-2 4 e1 1 channel-group 15 timeslots 1-5,20-23 exit exit int s 1/1/0.1/2/...