This instruction is for users who want to use openvox (IX100) mini cards (B100M/B200M/B400M/A400M) working with PC Engines TM Alix 2C2. There are few steps you have to go through: 1. Preparing the hardware:. A. Make sure that you have an at least 8GB CF cards. B. Make sure the power supply is set correctly. Please check that, if the ports of cards work under NT of mini BRI cards or FXS of A400M, ...

大家好： 通常安装数字卡大家都有一些和电信连接的问题，不知道是电信线路的问题或是硬件本身有毛病。如果你怀疑硬件本身有问题的话，我给大家介绍一个比较简单实用的工具， 这个工具是测试卡硬件本身的问题的。 这个工具可以用在Sangoma/Digium/ openvox的PRI 数字卡上。这里有几个步骤需要大家安装执行： 1） 首先你做一个lookback 测试的线。注意这里的做法是1 对4， 2 对5. 具体你做法可以参照这个连接： http://www.ortizonli...

hello, if anyone wants to rebuild your RPM with a openvox a1200 new patch, you can do it in this way: 1) download the zaptel-1.4.XXX.src.rpm 2) install src.rpm 3) download the patch from(http://bbs.openvox.cn/viewthread.php?tid=714&extra=page%3D1&frombbs=1) 3) cp the patch to /usr/src/readhat/SOURCES （I am using centos-5） 4) cd /usr/src/redhat/SPEC 5) edit the SPEC file and change the patch6 to:...

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false 7.8 磅 0 2 false false false EN-US ZH-CN X-NONE ...

hello, all of users: openvox IX100 with PC Engines Alix 2C2 works under Trixbox(2.6), which installed in CF card. it is smaller and good enough for SOHO office. here is what you should go: 1) using VMware to create a image for CF card booting 1.1) setting for a machine: Linux 2.6kernel, 256mb ram, 1 serial port, 2 usb port, CF card as a PHYSICAL drive 1.2) Editing: etc/grub.conf, /etc/inittab,...

hello, all of asteriskers: it is a alternative for Asterisk GUI beside Trixbox. we tested it with openvox A400P. it can support parts of Chinese, not full support for Chinese. you can try that. please go to official website(http://www.elastix.org) to get it and play with your environment. the below pictures are some GUIs. Regards! zhu

hello, we will release openvox G400P very soon. here , i posted a test version. please go though these steps， if you have a test card: 1) unzip the bristuff to /usr/src // 解压 bristuff 2) under bristuff, run the command: ./install.sh // 运行 安装脚本 3) make sure all steps are done correctly without any errors. 4) replace the patch files, which you can get from openvox website. 5) under brist...

hello: if you are interested in building voyage-linux(debian based) with openvox IX100(PC EnginesTM Alix 2C2 based), you can refer this: http://openvox.com.cn/downloadsFile/building_voyage-linux-openvox-ix100_from_scratch.pdf. it will guild you from starting point until making calls: 1) building system for CF card 2) building system environment including kernel source and some necessary tools 3) c...

hello, all of users: openvox releases A1200P/A800P driver to support Dahdi. To install a1200p/a800p with dahdi, install some support packages as zaptel requires, then please go through these steps: 1) get dahdi-linux, dahdi-tools and asterisk wget http://downloads.digium.com/pub/asterisk/releases/asterisk-1.6.0.1.tar.gz wget http://downloads.digium.com/pub/telephony/dahdi-linux/dahdi-linux...

hello, all of users: if anyone wants to try mini pci with analog card, you can take a look at openvox A400M. it works with PC engines motherboard, which a small and low-power motherboard. the PBX system can be built easily with askozia that is a small system with freebsd, asterisk, zaptel and GUI. Regards, zhu [ 本帖最后由 zhulizhong 于 2008-3-19 16:13 编辑 ]