安装10g在进行安装检测的过程中当检查到“checking network configuration requirements“的时候报: “Check complete. The overall result of this check is: Not executed <<<< Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to ...
服务器在装系统red hat linux enterprise as4的时候,只选择了了服务器--》服务器配置工具和开发--》开发工具,然后按要求已经安装了lame,flvtool2,Libogg,Libvorbis,xvid,x264,并把要求支持的库essential-20060611目录下的所有文件拷贝到了/usr/local/lib/codecs,但是在装MPLAYER的时候,出现一大堆错误,解决了一个,另外一个又出现,好郁闷,不知道到底装在服务器这种配置中到底需要安装哪些包才能把MPLAYER安装上去,现...
一台机器上装了red hat linux as4能同时装Apache和Weblogic两个WEB服务器吗?主要想实现在Weblogic上运行一个JSP网站,在Apache上做虚拟主机 该服务器只有一个公网IP,请问怎么设置啊?
安装完red hat linux as4后,能够看到已经识别成Ethernet类型的网卡,而且网卡的状态是不活动的,当激活时,提示ipw2200有问题,请问如何解决?
这里写一个red hat as4开启telnet过程开启过程,我主要是看这里或其他论坛都有这样的现象,不知你们对这里的telnet怎么就这么难,我觉得和其他的系统打开telnet没有什么两样,基本你们按照以下步骤(4个步骤)就可以了: 1、确定你的telnet服务打开没有: [root@111 ~]# chkconfig --list|grep telnet telnet: off krb5-telnet: off [root@111 ~]# 注意检查结果这里是关闭状态 2、打开telnet服务: [root...
我安装好red hat as4.0 在选择软件包的时候,我没有选择X窗口图形界面。可是装完以后,登陆的时候,出现登陆图形界面!而不是文本登陆界面。而且这个 图形界面root用户不能登陆!why !!!
我在装系统的时候没有安装BIND服务,后来在 光盘李找到了 bind-9.2.4-2.i386.rpm 的包 安装后 手工配置 named.conf 等文件 但是配置好后服务始终起不来,说 named.ca 文件权限错误! 下面是named.ca 文件类容: // Default named.conf generated by install of bind-9.2.4-2 options { directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats...