debian 怎样设置静态ip
作者: dzajk 出自: http://www.linuxdiyf.com 1. ip地址设置 debian:~#vi /etc/network/interfaces // 动态DHCP获得 # 启动系统激活设备. # Loop回环地址. auto lo iface lo inet loopback # 启动系统激活设备. # 网卡eth0设置为DHCP类型. auto eth0 iface eth0 inet dhcp // 静态Static获得 # 启动系统激活设备. # Loop回环地址. auto lo iface lo inet loopback # 启动系统激活设备. # 网卡eth0设置为Static类型. auto eth0 if...
by sdccf - Linux文档专区 - 2008-04-26 14:19:21 阅读（647） 回复（0）
debian中设置ip debian 503版本。 vhost:/# cd /etc/network vhost:/etc/network# vi interface # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 203.171.237.2...
以root身份运行，然后修改 /etc/network/interfaces这个文件,可以设置ip auto eth0 iface eth0 inet static address 192.168.1.7 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers DNSip #此处可以不设，而是在/etc/resolv.conf中设置。 设置DNS服务器 #cat /etc/resolv.conf nameserver 61.177.7.1 nameserver 202.102.14.141 本文来自ChinaUnix博客，如果查看原文请点：...
编辑 etc/network/interfaces 加入： auto eth0 iface eth0 inet static address 192.168.200.99 netmask 255.255.255.0 gateway 192.168.200.100 重启网络:sudo /etc/init.d/networking restart 本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u3/94354/showart_1897311.html
步骤如下： 1. svcadm enable physical:default 2. svcadm disable physical:nwam 3. system->system manager->network 4. svcadm restart milestone/network 本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/17556/showart_1288244.html
off physical:nwam server #svcs -a | grep physical disabled Nov_21 svc:/network/physical:nwam online Nov_21 svc:/network/physical:default #svcadm disable svc:/netword/physical:nwam #vi /etc/hosts add ip hostname #touch /etc/hostname.*** ***=network card #echo ip > /etc/hostname.*** #vi /etc/nsswith.conf hosts file dns #vi /etc/resolv.conf nameserver ip address...
off physical:nwam server #svcs -a | grep physical disabled Nov_21 svc:/network/physical:nwam online Nov_21 svc:/network/physical:default #svcadm disable svc:/netword/physical:nwam #vi /etc/hosts add ip hostname #touch /etc/hostname.*** ***=network card #echo ip > /etc/hostname.*** #vi /etc/nsswith.conf hosts file dns #vi /etc/resolv.conf nameserver ip address vi /etc/nodename hostname vi /etc/netm...
ubuntu server 设置静态ip . 修改这个网络配置文件，默认一般是自动获得ip的。 sudo vi /etc/network/interfaces 文件内容：[code]view plaincopy to clipboardprint? 01.auto lo 02.iface lo inet loopback 03. 04.mapping hotplug 05.script grep 06.map eth0 07. 08.auto eth0 09.iface eth0 inet static 10.address 192.168.1.101 11.netmask 255.255.255.0 12.network 192.168.1.0 13.broadca...
