Configure haproxy with TPROXY kernel for full transparent proxy by Malcolm Turnbull Standard Kernel builds don’t support TPROXY ( 2.6.28 does now!). For example if you use haproxy as the load balancer then all of the backend servers see the traffic coming from the IP address of the load balancer. TPROXY allows you to make sure the backend servers see the true client IP address in the logs. Ps. ...
by wujing168 - Linux文档专区 - 2009-11-12 10:57:35 阅读(5394) 回复(0)
本帖最后由 飞机塞进菊花 于 2014-07-09 19:25 编辑 想在自己环境中配置haproxy透明代理 可是怎么也配不通 服务器出口IP为192.168.99.118 与客户端接口IP为172.16.126.1 客户端IP为172.16.126.110 网关为172.16.126.1 iptables配置 iptables -t mangle -N DIVERT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 111 iptables -t mangle -A DIVERT -j ACCE...
本帖最后由 xiewayne 于 2014-03-06 14:49 编辑 Hi,万能的unix社区大神们,本人遇到的Squid透明代理+网桥+haproxy的问题,请点拨下: Squid3.3.8部署在配置了网桥的Centos5.8设备上,连接此设备的UserPC电脑访问WEB已经OK。 但若想在设备上再部署一个haproxy,将haproxy根据一些规则分发给Squid进行处理,则会出现访问出错。 **如下: UserPC(192.168.199.100) |---------------- 设备(192.168.199.177)---------| WEB...
最近小弟一直在测试,网络上的文章都是一个模子的,来来去去都是以下几句: iptables及路由规则: iptables -t mangle -N DIVERT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 111 iptables -t mangle -A DIVERT -j ACCEPT ip rule add fwmark 111 lookup 100 ip route add local 0.0.0.0/0 dev lo table 100 linux 内核启动项: net.ipv4.conf.all.send_r...
haproxy 反向代理配置问题 本人按网上教程自编译后运行后想做反向代理配置但出现如下情况 配置文件: global maxconn 5120 chroot /usr/local/haproxy uid 504 gid 506 daemon quiet nbproc 2 defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen appli1 0.0.0.0:90 mode http optio...
不知道群里有没有朋友使用haproxy作为web server集群的前端分发器。 至于为什么选择haproxy这里就不详细阐述了,但是遇到的问题希望和各位交流交流! 我现在后端只使用了两台webserver, 而客户端验证方式是采用的cookie保存验证信息。 假设现在一客户端和server A成功建立了会话,那么在server A 出现故障之前,一切都是正常的。 所以我选择手动down掉server A, 然后再回到客户端刷新当前页面,页面展现没有任何问题,但是用户...
今天有空尝试了一下,haproxy反向代理,根据HTTP请求的主机头及请求URL进行后端服务器的选择,实现类似7层交换的功能。 定义好frontend和backend,用ACL+use_backend进行匹配,配置文件的条理还是很清晰的。负载均衡可以有多种方式: 1、简单的轮询,balance roundrobin; 2、根据请求的源IP,balance source; 3、根据请求的uri,balance uri; 4、根据请求RUL中的参数,balance url_param。 在上述方式的同时,还可以根据cooki...
本帖最后由 pipe55 于 2014-07-26 13:23 编辑 使用haproxy 做负载均衡转发到后端web 8080端口,关于 href 的url 结尾不加 "/" 会自动跳转到8080错误显示,如下: vi /etc/haproxy/haproxy.cfg[code] ..... frontend www bind *:80 mode http acl host_test hdr_beg(host) -i mytest.usportnews.com use_backend testserver if host_test default_backend webservers backend webser...
本帖最后由 tong0245 于 2014-02-19 17:16 编辑 问个无关问题haproxy对比ngix那个作为代理的稳定性和性能好些 非常感谢 应用本身是个web应用普通http协议