- 论坛徽章:
- 0
|
作者：南非蜘蛛
email:zhedou@sohu.com
不知道大家安装的时候有没有碰到这个问题
Copying mini-root to local disk. WARNING: /pci@0,0/pci...
WARNING: /pci@0,0;pci-ide@7,1/ide@1 (ata1):
timeout: abort request, target=0 lun=0
WARNING: /pci@0,0;pci-ide@7,1/ide@1 (ata1):
timeout: abort request, target=0 lun=0
WARNING: /pci@0,0;pci-ide@7,1/ide@1 (ata1):
timeout: abort request, target=0 lun=0
WARNING: /pci@0,0;pci-ide@7,1/ide@1 (ata1):
timeout: abort request, target=0 lun=0
WARNING: /pci@0,0;pci-ide@7,1/ide@1/sd@0,0 (sd0):
SCSI transport failed: reason \'reset\'\" retrying command
郁闷的要死，每次安装操作系统，就没有一次顺利的
经过查找资料发现Solaris 9 x86 已经改变了默认的ATA DMA 模式: 在S9 x86 上是enable的，在S8 x86上就disable的.
如果你的主板BIOS里有\'ATA DMA\'，\'PnP OS\' 的选项，请设置成enable，如果BIOS里没有这个选项，请在安装的时候在DCA的菜单里把 \"ata-dma-enabled\"由1 ->; 0 ，可以试试，我也没有试过这个方法
disable ACPI and option in BIOS.
对于这个问题还有可能就是你的南桥芯片不支持IDE设备，请打itu.3的补丁，这种情况在dell1650，dell2650，dell6650...上发生的很多，请大家注意
如果还有问题，欢迎大家和我继续讨论
如果遇到这个问题，需要这么解决
Are there messages from the \"pcplusmp\" kernel module in /var/adm/messages?
Messages similar to the following ones:
pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
pcplusmp: ide (ata) instance #1 vector 0xf ioapic 0x2 intin 0xf is bound to cpu 0
pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 0
pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 0
pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
pcplusmp: pci10b7,9201 (elxl) instance 0 vector 0x5 ioapic 0x2 intin 0x5 is bound to cpu 0
You can try to disable the use of the pcplusmp module and the APIC, by adding
set pcplusmp:apic_forceload = -1
or
set pcplusmp:apic_use_acpi = 0
to /etc/system. Reboot Solaris after modifying /etc/system.
I had to use the same workaround for getting sound working on an ASUS
A7N8X board. |
|
免费注册
发表于 2003-02-20 17:01
发表于 2003-02-20 17:39
